5.Disconnect the hard disk module from the connector by pulling on the mylar tab on the hard disk module.
6.Remove the hard disk module.
NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it.
7.Remove the four screws (G) as shown.
Step | Size (Quantity) | Color | Torque |
1~4 | M3 x L4 (4) | Silver | 1.8 |
|
|
|
|
8.Remove the hard disk drive from the bracket.
Removing the Optical Drive Module
1.See “Removing the Battery Pack” on page 62.
70 | Chapter 3 |