JL Audio f110 owner manual Unbalanced Inputs, RCA-type connection Tip Positive

Page 19

IMPORTANT

Unbalanced Inputs

The Fathom subwoofer features individual left and right unbalanced RCA- type input connectors. These are the most commonly used connectors for home audio applications and must be used if your receiver or preamplifier/processor does not provide balanced outputs. While unbalanced connections are not as noise-immune as a balanced connection, Fathom subwoofers employ optical isolation on the unbalanced inputs to minimize the possibility of noise in your system.

For systems with a mono subwoofer or “LFE” channel connection, only the RCA-type jack labeled “Left or Mono” will be used. This applies to most modern multi-channel receivers and preamplifier / processors. Separate left and right RCA-type input jacks are provided for systems without a dedicated mono subwoofer connection. This typically applies to two-channel audio equipment.

Technical Notes:

When balanced outputs are not available on the signal source, you must use the RCA-type unbalanced inputs. Fathoms feature optical isolation circuitry on the unbalanced inputs to minimize the likelihood of ground loop induced noise. Unbalanced input impedance is 10 kohms.

Connections are industry-standard for unbalanced signal cables as follows:

RCA-type connection: Tip: Positive

Sleeve: Negative

IMPORTANT: IF NOISE EXISTS AFTER CONNECTION, FATHOMS ALLOW FOR GROUNDING OR ISOLATION OF THE UNBALANCED INPUTS. PLEASE REFER TO THE “INPUT MODE SWITCHES” SECTION ON PAGE 20 OF THIS MANUAL FOR FURTHER INFORMATION ON MINIMIZING NOISE.

Fathom f110

Page 19

Image 19
Contents F110 Risk of Electric Shock Do not Open Important Safety InstructionsFathom f110 FCC Compliance Statement Table of ContentsIntroduction Product Overview Placing Your Fathom in Your Listening Room #&454&5*/104*5*0/4 Recommended Subwoofer Placement Options for One FathomRear-view of cabinet install Special Considerations for BUILT-IN InstallationsRecommended Subwoofer Placement Options for Two Fathoms Using Two FathomsFathom f110 Detailed instructions on unpacking the subwoofer Unpacking Your FathomFront Control Panel Rear Controls and Connectors Calibration Mic. Input Power SwitchFront Panel Controls in Detail Automatic Room Optimization A.R.OCalibrate Button Input Mode IndicatorsLevel Mode Defeat ButtonLP Freq Master Level KnobLights LP FilterF. Trim PhasePolarity Balanced Inputs Connecting Your FathomTechnical Notes RCA-type connection Tip Positive Unbalanced InputsGrounded / Isolated Switch Input Mode SwitchesMaster / Slave Switch Output to Slave connector is designed to be used as follows Output to Slave ConnectorIEC-Style AC Connector Fathom Rear Controls Master Processor Stereo Active Crossover Balanced Outputs Fathom f110 On your Active Crossover or Bass Management Processor Recommended Setup ProceduresPreparation for Setup Process On your Home Theater Receiver or Preamp/ProcessorOn the Fathom’s Front Panel Level Setting Subwoofer System SetupPolarity and Phase Adjustment Applying Automatic Room Optimization A.R.O Extreme Low Frequency e.l.f. Trim Can I place objects on my subwoofer? Frequently Asked QuestionsIs the Fathom magnetically shielded? Gloss-black models Cleaning Your FathomTroubleshooting Fathom f110 International Warranties Limited Warranty / Service InformationIf you need service on your JL Audio product For Service Information in the U.S.A. please callFeatures

f110 specifications

The JL Audio Fathom f110 is a compact yet powerful subwoofer designed to deliver exceptional low-frequency performance in a variety of listening environments. This subwoofer is an integral component of the Fathom series, which is renowned for its commitment to high-quality sound and advanced technology. The f110 is designed to blend seamlessly with both audiophile-quality music systems and home theater setups.

One of the key features of the f110 is its 10-inch subwoofer driver, which is engineered for high output and low distortion. The driver is constructed with advanced materials, including a cast-alloy basket and a high-temperature voice coil, ensuring durability and reliability. This design allows the f110 to produce deep, precise bass with minimal cone breakup.

The f110 is powered by a robust onboard amplifier that delivers an impressive 1,000 watts of peak power, allowing it to handle dynamic audio passages with ease. This amplifier utilizes JL Audio's Differential Drive technology, which enables the driver to achieve exceptional efficiency and linearity. As a result, the f110 can deliver powerful bass without sacrificing clarity or definition.

In addition to its impressive driver and amplifier, the Fathom f110 is equipped with sophisticated DSP (Digital Signal Processing) capabilities. This technology allows for precise room correction and equalization, ensuring that the subwoofer performs optimally in any environment. The user-friendly interface allows listeners to adjust various parameters, such as room size, frequency response, and phase alignment, to achieve the desired sound profile.

The cabinet of the f110 is constructed from high-quality MDF and features a sophisticated design that minimizes internal resonances. Its sleek and modern exterior includes an elegant finish that complements any décor, providing an aesthetically pleasing addition to any audio setup.

Connectivity is also a top priority for the f110, as it includes multiple inputs and outputs, allowing for easy integration with various audio systems. The subwoofer can be connected via line-level inputs or speaker-level inputs, providing versatility for different configurations.

Overall, the JL Audio Fathom f110 is a powerful and versatile subwoofer that epitomizes quality and performance. Its combination of advanced technologies, high-output capabilities, and user-friendly features make it a superior choice for any audio enthusiast looking to enhance their listening experience. Whether for music playback or home theater applications, the f110 delivers an impactful and immersive sound experience.