Output to Slave Connector, IEC-Style AC Connector

IMPORTANT

n is not any use

on is not any ause

IMPORTANT: PLEASE REFER TO THE “SYSTEM CONNECTION DIAGRAMS” ON PAGES 26-29 FOR MORE INFORMATION ON USING THE INPUT / OUTPUT CONNECTIONS.

“Output to Slave” Connector

If you are operating more than one Fathom subwoofer in one home theater system, you will designate one Fathom as the Master (see page 20), and then feed signal from it to the remaining “Slave” Fathoms via this balanced XLR output. The “Output to Slave” cable can be connected to the “Left or Mono” balanced XLR input on the next Fathom. When a Fathom is in “Slave” Mode, its “Output to Slave” connection can be used to pass signal to further Fathoms operating in “Slave” mode.

The “Output to Slave” connector is designed to be used as follows:

1)From the “Master” Fathom’s “Output to Slave” connector to the first “Slave” Fathom’s “Left or Mono” XLR balanced input.

2)From the first “Slave” Fathom’s “Output to Slave” connector to the second “Slave” Fathom’s “Left or Mono” XLR balanced input.

3)From the second “Slave” Fathom’s “Output to Slave” connector to the third “Slave” Fathom’s “Left or Mono” XLR balanced input. Etc, etc. (up to ten Fathoms may be connected in this configuration).Appropriate balanced cables with XLR terminations are available from your JL Audio dealer and are not included with the Fathom.

Technical Notes:

•The “Output to Slave” signal carries any signal processing selected on the Master Fathom (including the Master Level setting and A.R.O. processing) to further Fathoms operating in “Slave” mode.

•From Fathoms operating in “Slave” mode, the “Output to Slave” signal is an exact, buffered replica of the balanced input signal, making this method of signal distribution preferable to using

Y-adapters or splitters.

•Use only shielded, connection cables with high quality

XLR connectors for Master/Slave connection. Never use unbalanced cables with adaptors.

IEC-Style AC Connector

The IEC-style AC cord receptacle receives the heavy-gauge, 6 ft. (1.8 m) long, power cord included with your Fathom subwoofer. Your Fathom should only be powered from a 120 V AC, 60 Hz outlet. Do not use any AC power cord other than the one supplied with the Fathom.

The Fathom subwoofer is a very powerful device and can draw a lot of current. If too many components are connected with a Fathom subwoofer to one electrical outlet, you risk tripping a household circuit breaker during very demanding program material. If this happens, split the Fathom and other components between two AC electrical circuits. If possible, for maximum performance, dedicate an AC circuit to each Fathom.

Fathom f110

Page 21

f110 specifications

The JL Audio Fathom f110 is a compact yet powerful subwoofer designed to deliver exceptional low-frequency performance in a variety of listening environments. This subwoofer is an integral component of the Fathom series, which is renowned for its commitment to high-quality sound and advanced technology. The f110 is designed to blend seamlessly with both audiophile-quality music systems and home theater setups.

One of the key features of the f110 is its 10-inch subwoofer driver, which is engineered for high output and low distortion. The driver is constructed with advanced materials, including a cast-alloy basket and a high-temperature voice coil, ensuring durability and reliability. This design allows the f110 to produce deep, precise bass with minimal cone breakup.

The f110 is powered by a robust onboard amplifier that delivers an impressive 1,000 watts of peak power, allowing it to handle dynamic audio passages with ease. This amplifier utilizes JL Audio's Differential Drive technology, which enables the driver to achieve exceptional efficiency and linearity. As a result, the f110 can deliver powerful bass without sacrificing clarity or definition.

In addition to its impressive driver and amplifier, the Fathom f110 is equipped with sophisticated DSP (Digital Signal Processing) capabilities. This technology allows for precise room correction and equalization, ensuring that the subwoofer performs optimally in any environment. The user-friendly interface allows listeners to adjust various parameters, such as room size, frequency response, and phase alignment, to achieve the desired sound profile.

The cabinet of the f110 is constructed from high-quality MDF and features a sophisticated design that minimizes internal resonances. Its sleek and modern exterior includes an elegant finish that complements any décor, providing an aesthetically pleasing addition to any audio setup.

Connectivity is also a top priority for the f110, as it includes multiple inputs and outputs, allowing for easy integration with various audio systems. The subwoofer can be connected via line-level inputs or speaker-level inputs, providing versatility for different configurations.

Overall, the JL Audio Fathom f110 is a powerful and versatile subwoofer that epitomizes quality and performance. Its combination of advanced technologies, high-output capabilities, and user-friendly features make it a superior choice for any audio enthusiast looking to enhance their listening experience. Whether for music playback or home theater applications, the f110 delivers an impactful and immersive sound experience.