Important Safety Instructions

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE AMP PANEL OR SPEAKER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

1)Read the Instructions — All safety and operating instructions should be read before the subwoofer is operated.

2)Retain the Instructions — The safety and operating instructions should be retained for future reference.

3)Heed Warnings — All warnings on the subwoofer and in the operating instructions should be followed.

4)Follow Instructions — All operating and use instructions should be followed.

5)Water and Moisture — The subwoofer should NOT be used near water – for example, near a bathtub, washbowl, sink, laundry tub, in a wet basement, near a swimming pool, etc.

6)Ventilation — The subwoofer should be situated so that its location or position does not interfere with its proper ventilation. For example, the subwoofer should not be situated on a bed, sofa, rug, or similar surface that may block airflow over the heatsink fins. If placing the subwoofer in a “built-in” installation, ensure that airflow to the heat sink at the rear of the subwoofer is not impeded. Do not cover the subwoofer heatsink with tablecloths, curtains, etc.

9)Heat and Flames — The subwoofer should be situated away from heat sources such as radiators, heat registers, stoves, fireplaces, or other devices which produce heat. Do not place candles on top of or near the subwoofer.

10)Power sources — The subwoofer should only be connected to a power supply of the type described in the operating instructions or as marked on the subwoofer.

11)Power Cord Protection — Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit the subwoofer.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the product.

Page 2

Fathom f110

f110 specifications

The JL Audio Fathom f110 is a compact yet powerful subwoofer designed to deliver exceptional low-frequency performance in a variety of listening environments. This subwoofer is an integral component of the Fathom series, which is renowned for its commitment to high-quality sound and advanced technology. The f110 is designed to blend seamlessly with both audiophile-quality music systems and home theater setups.

One of the key features of the f110 is its 10-inch subwoofer driver, which is engineered for high output and low distortion. The driver is constructed with advanced materials, including a cast-alloy basket and a high-temperature voice coil, ensuring durability and reliability. This design allows the f110 to produce deep, precise bass with minimal cone breakup.

The f110 is powered by a robust onboard amplifier that delivers an impressive 1,000 watts of peak power, allowing it to handle dynamic audio passages with ease. This amplifier utilizes JL Audio's Differential Drive technology, which enables the driver to achieve exceptional efficiency and linearity. As a result, the f110 can deliver powerful bass without sacrificing clarity or definition.

In addition to its impressive driver and amplifier, the Fathom f110 is equipped with sophisticated DSP (Digital Signal Processing) capabilities. This technology allows for precise room correction and equalization, ensuring that the subwoofer performs optimally in any environment. The user-friendly interface allows listeners to adjust various parameters, such as room size, frequency response, and phase alignment, to achieve the desired sound profile.

The cabinet of the f110 is constructed from high-quality MDF and features a sophisticated design that minimizes internal resonances. Its sleek and modern exterior includes an elegant finish that complements any décor, providing an aesthetically pleasing addition to any audio setup.

Connectivity is also a top priority for the f110, as it includes multiple inputs and outputs, allowing for easy integration with various audio systems. The subwoofer can be connected via line-level inputs or speaker-level inputs, providing versatility for different configurations.

Overall, the JL Audio Fathom f110 is a powerful and versatile subwoofer that epitomizes quality and performance. Its combination of advanced technologies, high-output capabilities, and user-friendly features make it a superior choice for any audio enthusiast looking to enhance their listening experience. Whether for music playback or home theater applications, the f110 delivers an impactful and immersive sound experience.