Onkyo HT-R590 instruction manual Connecting the AV Receiver, Connecting the Speaker Cables

Connecting the AV Receiver

Connecting the Speaker Cables

The following illustration shows which speaker should be connected to each pair of terminals. If you're using only one

surround back speaker, connect it to the SURROUND BACK or FRONT HIGH k terminals.

Surround	back/	Surround	back/
front	high	front	high	Surround	Surround
right		left		rli ht	left	Center

CENTER

7.1chUSEONLV

SU_OUN_BACK

Or_RONTHIGH SURROUND

Front right Front left

• You call specify whether surround back o1"front high speakers are connected ill the "Sp Config (Speaker Configuration)" menu

(_ page 36) or during Audyssey 2EQ (!')Room Correction and Speaker Setup (_ page 24).

N Screw-type speaker terminals

Strip 1/2" to 5/8" (12 to 15 mm) of insulation from the ends of the speaker cables, and twist the bare wires tightly, as shown.

1/2" to 5/8" (12 to 15 mm)

N Banana Plugs (excluding Asian models)

•If you are using banana plugs, tighten the speaker terminal before inserting the banana plug.

•Do not insert the speaker code directly into the center hole of the speaker terminal.

ER

11