m How do I change the language of a multiplex source
Use the | "Input | Ch (Mux)" setting | on the "Audio | 37 | |
Adjust" | menu | to select "Main" | or | "Sub". |
|
m The R I functions don't work
To use | umst make | all | and | 16 | ||
an analog | audio | connection | (RCA) | between | the |
|
component | and | AV receiver, even | if they are |
|
| |
connected | digitally. |
|
|
|
| |
N The following settings can be made for the composite video inputs
You must use the buttons on the unit to make these settings.
On the AV receiver, press the input selector for the input source that you want to set and the SETUP button simultaneously. While holding down the input selector button, press SETUP until "Video ATT:ON" appears on the display. Then, release both buttons. To reactivate the setting, repeat the above process so that "Video ATT:OFF" appears on the display, and release the buttons.
•Video Attenuation
This setting can be made for the BD/DVD, VCR/DVR, CBL/SAT, GAME, or AUX input.
If you have a games console connected to the composite video input, and the picture isn't very clear, you can attenuate the gain.
Video ATT:OFF: (default).
Video ATT:ON: Gain is reduced by 2 dB.
N If the picture on your TV/monitor connected to
HDMI OUT is unstable, try switching the DeepColor function off
To turn off the DeepColor function, simultaneously press the CBL/SAT and OON/STANDBY buttons on the AV receiver. While holding down CBL/SAT, press r3ON/STANDBY until "Off" appears on the display. Then, release both buttons. To reactivate the DeepColor function, repeat the above process until "On" appears on the display and release the buttons.
The AV receiver contains a microcomputer for signal
processing and control functions. In very rare situations,
severe interference, noise from an external source, or
static electricity may cause it to lockup. In the unlikely event that this happens, unplug the power cord from the wall outlet, wait at least five seconds, and then plug it back in again.
Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the unit's malfunction. Before you record important data, make sure that the material will be recorded correctly.
Before disconnecting the power cord from the wall | ] |
loutlet, set the AV receiver to Standby. |
EF1
53
