Controlling Other Onkyo Components
You can use the AV receiver's remote controller to control your other Onkyo AV components. This section explains how to enter the remote control code (with the default underlined) for a component that you want to control: DVD, CD, etc.
Onkyo components that are connected via f'41 are controlled by pointing the remote controller at the AV receiver, not the component. This allows you to control components that are out of view, in a rack, for example.
The following REMOTE MODE are preprogrammed
with remote control codes for controlling the components listed. You do not need to enter a remote control code to
control these components.
For details on controlling these components, see the pages indicated.
BD/DVD Onkyo
TV/CD Onkyo CD player (_ page 48)
You'll need to enter a code for each component that you want to control.
Look up the appropriate remote control code in the
Remote Control Codes for Onkyo Components
Connected via f'4 I.
2 While holding down REMOTE MODE to which
you want to enter a code, press and hold down DISPLAY (about 3 seconds).
•Remote control codes cannot be entered for RECEIVER
•Apart fi'om RECEIVER, remote control codes fi'om any category can be entered for REMOTE MODE. However,
these buttons also work as input selector buttons
(_ page 19), so choose a REMOTE MODE that corresponds with the input to which you connect your component. For example, if you connect your CD player to the CD input, choose TV/CD when entering its remote control code.
3 Within 30 seconds, use the number buttons to enter the
The remote indicator flashes twice.
If the remote control code is not entered successfully,
the remote indicator will flash once slowly.
1Make sure the Onkyo component is connected with an f'41 cable and an analog audio cable (RCA).
See "Connecting Onkyo f'41 Components" for details
(_ page 16).
2 Enter tile appropriate remote control code for
REMOTE MODE referring to the previous section. 42157:
Onkyo cassette tape deck with f"/I 81993:
Onkyo Dock with f"/I
3Press REMOTE MODE, point the remote
controller at the AV receiver, and operate the component.
Controlling Onkyo components without R I
If you want to control an Onkyo component by pointing the remote controller directly at it, or you want to control
an Onkyo component that's not connected via f'4 I, use the following remote control codes:
30627:
Onkyo DVD player without R I 71817:
Onkyo CD player without R I 32900/33000:
Onkyo
Onkyo HD DVD player 70868:
Onkyo MD recorder without
71323:
Onkyo CD recorder without
82990:
Onkyo Dock without f"/I
;;;;;;;;;;;;;;;;;;;;;;;;;;
ER
47