Onkyo HT-R590 Subwoofer, Surround*l, Front, Surround Back Ch, Crossover Crossover Frequency

by Audyssey 2EQ® Room Correction and Speaker

Iome of the settings in this section are set automatically Setup (3 page 24).

Here you can check the settings made by Audyssey 2EQ Room Correction and Speaker Setup, or set them manually, which is useful if you change one of the connected speakers after using Audyssey 2EQ Room Correction and Speaker Setup.

This section explains how to specify which speakers are connected and their sizes.

For speakers with a cone diameter larger than 6-1/2 inches (16 cm), specfly Large

(lull band). For those with a smaller Cone diameter diameter, specify Small (default crossover 100 Hz).

The crossover frequency can be changed in the "Crossover (Crossover Frequency)" (3 page 36).

•These settings are not available ill either of the following cases:

-a pair of headphones is connected.

-the "Audio TV Out" setting is set to "On" (_ page 42).

iii	i	- "HDMI	Ctrl	(RIHD)"	is set	to "On" (_ page	42) and
		you're	listening	through	your	TV speakers.

mSubwoofer

_Yes

No

mFront

Small:

Large:

Select based on the cone diameter.

• ffthe	"Subwoofer"	setting is set to "No", this setting is fixed at
"Large"	and does	not appear.

m Center*l,

Surround*l, Front

High*l*2*3*4*5,

Surround

Back*V2*3*6

Small:

Large:

Select based on the cone diameter.

None:

Select if no speaker is connected.

"1

ff

the

"Front"

setting

is

set

to

"Small",

the

"Large"

option

cannot

be

selected.

*2

ff

the

"Surround"

setting

is

set

to

"None",

this

setting

cannot

be

selected.

*3

ff

the

"Surround"

setting

is

set

to

"Small",

the "Large"

option

cannot

be

selected.

*4

For "Front

High",

the

default

is "None".

*5

ff

the

"Surround

Back"

setting

is

set

to

other

than

"None",

this setting is set to "None".

"6

ff

the

"Front

High" setting

is

set

to other

than

"None",

this

setting is set to "None".

El1

I Surround Back Ch

lch:

Select if only one surround back speaker is connected.

2ch:

Select if two (left and right) surround back speakers

are connected.

•ff the "Surround Back" setting is set to "None", this setting cannot be selected.

m Crossover (Crossover Frequency)

This setting is adwmtageous for the speakers that you specified as "Small" in the "Sp Config (Speaker Configuration)" (3 page 36). To get the best bass performance from your speaker system, you need to set the crossover frequency according to the size and frequency response of your speakers.

40Hz, 50Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz, 120Hz, 150Hz, 200Hz

Use the diameter of the smallest speaker in your system when choosing the crossover frequency.

Speaker			cone		diameter				Crossover	frequency
Over	8	in.	(20		cm)				40/50160	Hz*
6-1/2	to	8	in.	(16		to	20	cm)	70/80/90	Hz*
5-1/4to6-1/2					in.	(13	to	16cm)	100Hz
3-1/2to5-1/4in.(9to13cm)									120Hz
Under	3-1/2			in. (9		cm)			150/200	Hz*

*Choose the setting suitable for the speaker.

•For a more accurate setting, look up the frequency response in the manuals supplied with your speakers and set accordingly.

•Choose a higher crossover frequency if you want more sound from your subwoofer.

m Double Bass

I

IThisRoom settingCorrectionis not andset automaticallySetupSpeakerby(3 Audysseypage 24).2EQ J

}On

}Off

Turn this setting on to boost bass output by feeding bass

sounds from the front left, right, and center channels to the subwoofer.

• This	function	can be set	only if	the	"Subwoofer"	setting is	set to
"Yes",	and	the "Front"	setting	is	set to "Large"	(_ page	36).

36