Onkyo HT-R590 m How to connect and setup, Each of tile HDMI Setup is changed to the

m How to connect and setup

1 Confirm the connecting and setting.

1.Connect the HDMI OUT jack to the HDMI input jack of the TV.

Blu-ray Oisc/OVO player, etc.

HDMI connection

[=AV receivej

connectionDIGITALAUDIO _ _ HDMIconnection

(OPTICAL)

TV, projector, etc.

2.Connect the audio output from the TV to the

OPTICAL IN 2 jack of the AV receiver using an optical digital cable.

•When the audio return channel (ARC) function is used with

an ARC capable TV, this connection is not necessary (÷ page 42).

3.Connect the HDMI output of the B lu-ray

Disc/DVD player/recorder to the HDMI IN 1 jack of the AV receiver.

•It is necessary to assign the HDM[ input when connecting the Blu-ray Disc/DVD player/recorder to other jacks

(_ page 35). Do not assign the components connected to the HDM[ IN to the TV/CD input at this time. Appropriate CEC (Consumer Electronics Control) operation can not be guaranteed.

2 Each of tile "HDMI Setup" is changed to the

following setting.

•HDMI Ctrl (RIHD): On

•Audio Return Ch (ARC): Auto

See details of each setting (@ page 42).

ED

3 Confirm the settings.

1.Turn on the power for all connected components.

2.Turn off the power of the TV, and confirm that

the power of the connected components is turned

off automatically with the link operation.

3.Turn on the power of the Blu-ray Disc/DVD player/recorder.

4.Start playback of the Blu-ray Disc/DVD

player/recorder, and confirm the following.

•The power of the AV receiver is turned on

automatically, and input with the Blu-ray

Disc/DVD player/recorder connected is selected.

•The power of the TV is turned on

automatically, and input with the AV receiver

connected is selected.

5.Following the operating instructions of the TV,

select "Use the TV speakers" from the menu screen of the TV, and confirm that the audio is

output from the speakers of the TV, and not from the speakers connected to the AV receiver.

6.Select "Use the speakers connected from the AV receiver" from the menu screen of the TV, and

confirm that the audio is output from the speakers

connected to the AV receiver, and not from the TV speakers.

•Perform the above operations when you initially use the AV receiver, when the settings of each component are changed, when the main power of each component is turned off, when the power cable is disconnected from the power supply, or when there has been a power outage.

4Operate with the remote controller.

For buttons that can be operated (@ page 47).

•Audio from DVD-Audio or Super Audio CD may not output from the TV speakers. You will be able to output the audio from the TV speakers by setting the audio output of the DVD player to 2ch PCM. (It may not be possible depending on the player models.)

•Even if you set to output audio on the TV speakers, audio will be output from the speakers connected to the AV receiver when you adjust the volume or switch the input on the AV receiver. To output audio from the TV speakers, re- do the operations on the TV.

•Do not connect the 1-41cable when connecting to the 1-41 and I-41 audio control compatible components.

•When you select anything other than the HDM[jack where the AV receiver is connected as the input on the TV, input on the AV receiver will be switched to "TV/CD".

•The AV receiver will automatically power on in conjunction when it determines it to be necessary. Even if the AV receiver is connected to an r411-I1_ compatible TV or player/recorder, it will not power on if it is not necessary. It may not power on in conjunction when the TV is set to output audio from the TV.

•Linked functions with the AV receiver may not work depending on the model. Operate the AV receiver directly in such cases.

58