Onkyo HT-R590 instruction manual Controlling a Blu-rayDisc/DVD Player, HD

You can reset a REMOTE MODE to its default remote

control code.

1 While holding down REMOTE MODE that you want to reset, press and hold down HOME until the remote indicator lights (about 3 seconds).

2 Within 30 seconds, press REMOTE MODE again.

The remote indicator flashes twice, indicating that the button has been reset.

Each of REMOTE MODE is preprogrammed with a remote control code. When a button is reset, its

preprogrammed code is restored.

You can reset the remote controller to its default settings.

1While holding down RECEIVER, press and hold down HOMEuntil the remote indicator lights

(about 3 seconds).

2 Within 30 seconds, press RECEIVER again.

The remote indicator flashes twice, indicating that the

remote controller has been reset.

By pressing REMOTE MODE that's been programmed with the remote control code for your component, you can control Onkyo component as below.

For details on entering a remote control code for a different component (_ page 47).

Controlling a Blu-ray Disc/DVD Player, HD

DVD Player

BD/DVD is preprogrammed with the remote control code for controlling a component that supports the 1-411-11_'1. The component must be able to receive remote control commands via r'411-11O and be connected to the AV receiver via HDMI.

Use the following remote control codes:

32910/33001/31612:

Blu-ray Disc/DVD player with r411-11O

"1 The [-'411-1lOsupported by the AV receiver is the CEC

system control function of the HDM[ standard.

En

48