Acer 4732Z/4332 manual Post

Error Messages		Check or do the following in sequence:
Power-on indicator turns off and LCD is	•	Power source (battery pack and power adapter.) See “Power
blank.		System Check” section on page 64.
	• Make sure all connectors are connected tightly and correctly.
	•	Reinstall the DIMM.
	•	Mainboard
Power-on indicator turns on and LCD	•	Power source (battery pack and power adapter.) See “Power
is blank.		System Check” section on page 64.
	• Reconnect the LCD cable
	•	Hard disk drive
	•	LCD panel
	•	Mainboard
Power-on indicator turns on and LCD is	•	Reconnect the LCD cable.
blank. POST is visible when using an	•	LCD panel
external CRT.	•	Mainboard
Power-on indicator turns on and a	•	Make sure all connectors are connected tightly and correctly.
blinking cursor is during POST.	•	Mainboard
Failure Fixed Disk	•	Reconnect the HDD connector.
	• Select “Load Setup Defaults” in the BIOS Setup Utility’s Exit
		menu.
	•	Hard disk drive
	•	Mainboard
No beep, power-on indicator turns off and	•	Power source (battery pack and power adapter). See “Power
LCD is blank.		System Check” on page 64
	• Make sure all connectors are connected tightly and correctly.
	•	Reconnect the DIMM.
	•	Mainboard
No beep, power-on indicator turns on and	•	Power source (battery pack and power adapter). See “Power
LCD is blank.		System Check” on page 64
	• Reconnect the LCD cable.
	•	Hard disk drive
	•	LCD cable
	•	LCD panel
	•	Mainboard
No beep, power-on indicator turns on and	•	Reconnect the LCD cable.
LCD is blank. But you can see POST on an	•	LCD panel
external CRT.	•	Mainboard
No beep, power-on indicator turns on and a	•	Make sure all connectors are connected tightly and correctly.
blinking cursor shown on LCD during	•	Mainboard
POST.
No beep during POST but system runs	•	Speaker
correctly.	•	Mainboard

58 Acer Aspire 4732Z/4332 Service Guide