Acer N141I1-L05 (GLARE), QD14TL0102, PLUTO MK6025GAS AC Adapter, Acpi Mode Power Management

AC Adapter

Item		Specification
Vendor & model name	LITEON PA-1650-02WR (3pin, 65W)
	LISHIN SLS0335A19A54LF (3pin, 65W)
Input Requirements
Maximum input current (A,	1.8A max@3.5A/100Vac and 240 Vac
@100Vac, full load)
Nominal frequency (Hz)	47 - 63
Frequency variation range (Hz)	47 - 63
Nominal voltages (Vrms)	90 - 264
Inrush current	The maximum inrush current will be less than 50A and 100A when the adapter
	is connected to 100Vac(60Hz) and 240Vac(50Hz) respectively.
Efficiency	High efficiency 85% minimum, at 100~240Vac AC input, full load, warm-up
	condition.
Output Ratings (CV mode)
DC output voltage	Offers constant voltage 19.0V output source with 150W max output power
	capacity.
Noise + Ripple	300mvp-pmax (20MHz bandwidth) for resistor load
Output current	0 A (min.)	3.5A (max.)
Output Ratings (CC mode)
DC output voltage	18.0 ~ 20.0
Constant output	7.9A
Dynamic Output Characteristics
Start-up time	3 sec. (@115 Vac and 230Vac full load)
Hold up time	5ms min. (@115 Vac input, full load)
Over Voltage Protection (OVP)	25V
Short circuit protection	Output can be shorted without damage, and auto recovery
Electrostatic discharge (ESD)	15kV (at air discharge)
	8kV (at contact discharge)
Dielectric Withstand Voltage
Primary to secondary	4242 Vdc for 1 second-
Leakage current	60uA at 240Vac/60Hz
Regulatory Requirements	1. FCC class B requirements (USA)
	2. VDE class B requirements (German)
	3. VCCI classII requirements (Japan)

Power Management

ACPI Mode	Power Management
Mech. Off (G3)	All devices in the system are turned off completely.
Soft Off (G2/S5)	OS initiated shutdown. All devices in the system are turned off completely.
Working (G0/S0)	Individual devices such as the CPU and hard disk may be power managed in
	this state.
Sleeping State (S3)	CPU Power Down
	VGA Power Down
	PCMCIA Suspend
	Audio Power Down
	Hard Disk Power Down
	Super I/O Power Down

Chapter 1 27