Source Technologies ST9510 manual Printer Installation

Page 5

1. Printer Installation

For complete information on how to unpack and setup your printer, see your printer’s user’s guide. Please read the following if you are going to install the printer driver shipped with your printer.

1.Locate the CD that was shipped with your printer.

Note: If you do not have a CD-ROM drive on the host PC, locate another computer with a CD-ROM drive, start the CD-ROM utility, and then follow the instructions on the screen to create printer driver diskettes.

2.Follow the instructions in the CD booklet to start the printer setup utility appropriate for your operating system, i.e. Windows 95, NT, etc. The setup utility will install printer driver and utilities to manage Source Technologies printer(s) attached to your PC or Network.

3.The Source Technologies printer, in most cases, assumes the printer driver is set to the internal DEFAULT values. The following Default values should not be changed for best overall printer performance and data stream requirements of the ST Secure MICR printer.

•Print Resolution under the Graphic Tab should be set to the Default value of 600 DPI.

•Print Quality and Picture Grade under the Graphic Tab should be set to the Default values of Use Printer Default.

A majority of other driver options can be set for your particular requirements. The most obvious of these would be a Paper Tray selection if your application uses the Print Driver Setting.

ST Secure MICR Printer User’s Guide

5

2006, Source Technologies

March 2006

 

All Rights Reserved

Page 4 Page 6
Image 5
Page 4 Page 6
Contents ST9510 Secure Micr Printer User’s Guide ST Secure Micr Printer User’s Guide Table of Contents Appendix Micr Commands ExamplesPrinter Installation Micr Printing Today Micr OverviewCheck Processing System ST Secure Micr Printer User’s Guide Micr Check Design Amount Convenience Amount Amount In Words Data Elements DateSignature Area Payee AreaDrawee Institution Name Account Title Memo LineAuxiliary On-Us Field Positions 65 to Micr LineExternal Processing Code EPC Field Position Routing Field Positions 43 toSample Check Quality Issues Quality WeightLayout StiffnessSecurity Note Security IssuesCheck Stock Security Features ST Secure Micr Printer User’s Guide ST Secure Micr Printer User’s Guide Secure Micr Micr FeaturesMicr Fonts Secure FontsMicr Toner Cartridge Resource StorageFonts and Secured Resources Micr CommandsPJL Unlock Sequence PJL Re-Lock SequencePCL Font Call Commands PJL Re-Lock Sequence With a New Password ValuePJL Info Micr Command ST Secure Micr Printer User’s Guide Toner Low Error MessagesToner Out Load Micr TonerToner Low Load Paper Error Blue ButtonReady / Data PCL Macro Call Micr Command ExamplePCL Initial Set-Up Sample Accounts Payable Check @PJL Enter Language = PCL PJL and PCL commands used to print the sample checkMicr Font Description Alpha/Numeric Hex Values Character Appendix a E13B Micr Font MappingDescription Alpha/Numeric Hex Value Secure Font Character Appendix B Secure Numeric Font MappingCharacter Description Alpha/Numeric Hex ValueDescription Alpha/Numeric Hex Value Character Appendix C ICR Secure Numeric Font MappingDescription Alpha/Numeric Hex Values CMC7 Font Appendix D CMC7 Micr Font MappingValues ZeroST Secure Micr Printer User’s Guide
Top Page Image Contents