Yamaha DPX-1300 G manual Loading the batteries into the remote control

Page 10

◆Loading the batteries into the remote control

1.Remove the battery compartment cover.

2.Insert two batteries (AA, UM3, or R6 type), matching the polarity markings on the batteries with those in the battery compartment.

3.After loading the batteries, close the cover until it snaps into

place.

1 3

2

Warning

•If the remote control must be used closer to the main unit than normal, or does not always operate correctly, exchange the batteries for new ones.

•Do not mix old and new, or different types of batteries.

•Remove the batteries if you do not plan to use the unit for a long time.

•If the batteries leak, dispose of them immediately, taking care not to touch the battery fluid. If the battery fluid comes into contact with your eyes, mouth, or skin, rinse it off with water immediately and consult a doctor. Clean the battery compartment thoroughly before installing new batteries.

◆Using the remote control with a wired connection

Use a 2P monaural miniplug cable (commercially available) to connect the remote control jack on the underside of the remote control to the REMOTE IN jack on the main unit. Use the wired remote control configuration to control the DPX-1300 without having to be within range of the remote sensor.

4

1

5

INPUT

INPU 2 T

3

-1 ID

-2 ID

INPUT

LIGH

T

6

8

Page 9 Page 11
Image 10
Page 9 Page 11
Contents DPX-1300 Others InstallationOperation For U.K. customersTable of contents Inappropriate places for installation Accessory checkFeatures Features EnglishMain unit Front panel and controls Main unit Rear panel / Connections Controls and functionsRemote control functions Remote control code switch Remote control EnglishLight switch Remote control cable jackLoading the batteries into the remote control Using the remote control with a wired connectionDistance to sensor Angle to sensor Limits for using the remote controlUse within a left/right arc of 30 degrees If you have not installed the main unit or screen PreparationTurn the power on and selecting an image for projection PrepararionMounting the projector on a table Setting up the DPX-1300Mounting the projector on the ceiling When using a 43 screen InstallationWhen using a 169 screen Projection distanceUsing V.POS vertical position to adjust image position Keystone adjustmentUsing Zoom to adjust image position Using the adjusters to adjust image positionConnecting to AV components ConnectionConnecting to computer devices RGB Digital DVI connectorProjection English Checking installation and connectionsPre-operation check Projection preparations completeTurning the power on Turning the projector power onPress the STANDBY/ON button Button on the remote control Lamp may blink when half lit. This is not a defect Placing the DPX-1300 in standby modePress the STANDBY/ON button Selecting using the Input button Selecting an input signalProjection image signal Projection Using the Input button to select a signalPress the + button to open the submenu Press the Aspect button Selecting a display aspect for a projection imageRemote cotrol Display aspect types Input signal type Input image Display aspect Projected image Representative examplesPattern button Adjusting the imageAdjusting the vertical position V.POS button Crosshatch pattern Grayscale pattern Color bar patternAdjusting the size of an image Zoom button Menu configurations Menu screenMenu items Menu item listSubmenu Items Lower level menu itemsMenu group items and functions Menu Adjusts the analog input signal gain and offset settings Level AdjustmentAdjusts the iris Optical White PeakingSignal Menu EnglishOvershoot Supp. Range Signal LevelSignal Status Overshoot Supp. LevelInitial Setup Trigger Out Menu ColorMessage Baud RateMenu operations Reset button Remote control onlyRemote Control Operation button functionsMenu screen Menu operations 1 with no submenuPress the Menu button to open Press the + or button to select a menu groupRemote Control Main Unit Menu Button Press the + or button to select a suitable settingSetting method depends on the item selected Remote Control Main UnitPress the + button to move to the submenu Press the h or g button to adjust item settingsMenu operations 2 with submenus Appears to the right of items that contain a submenuSpecial operations See page 32 for datails about each color itemExample Color temperature fixed mode Example Using the color temperature fixed modeName of the selected item appears here Resetting all the settings Resetting the selected settingsChanging the position of the menu screen Resetting the lamp running time Subtitle ZoomChanging the Gamma Press the buttonInline menu composition Adjusting image quality using the inline menuExample Using the inline menu Inline menu item listUsing the remote control Memory configurationsSaving memory settings Using the menuBottom of the screen Memory function EnglishPress the g button to select Memory number status from Press the h or g button to select a memory numberDeactivating Memory Lock Setting Memory LockMemory lock Select the memory number youCopy source Memory copyRecall the memory number to be Press the g button to selectPress the + button to display the confirmation screen Press ButtonResetting to the default settings in the memory menu Initialization of the currently selected memoryInitialization of all the memories Glossary ReferenceCompatible signal types Signal type Active Component type Pixels Lines KHz Reference EnglishRegular care MaintenanceReplacing the filter Loosen the lamp cover screws Replacing the lampLamp cover screws Troubleshooting To protect the lamp, you cannot turn onTroubleshooting Message display Message ConditionLED indicator meanings LED indicator State MeaningControls SpecificationsOptical GeneralDimensional drawing 119.1

DPX-1300 G specifications

The Yamaha DPX-1300 G is a cutting-edge digital projector designed for professional applications, combining advanced technology with high-quality performance. This projector is engineered to deliver vibrant visuals, making it an ideal choice for a variety of settings, including corporate presentations, educational environments, and large-scale events.

One of the standout features of the Yamaha DPX-1300 G is its impressive brightness. With a lumens output that can reach up to 3000 ANSI lumens, the projector ensures clear and vivid images even in well-lit environments. This high brightness level, combined with its high contrast ratio, produces sharp details and rich colors that captivate audiences. The projector supports a variety of resolutions, including Full HD, ensuring compatibility with the latest content.

Incorporating Yamaha’s sophisticated optical technologies, the DPX-1300 G utilizes a 3LCD system that promises exceptional color accuracy and smooth image rendering. This technology minimizes the risk of color distortion and ensures that presentations remain true to their original intent. Additionally, the projector features advanced image processing capabilities, which enhance sharpness and reduce noise, providing a polished viewing experience.

The DPX-1300 G supports multiple connectivity options, including HDMI, VGA, and USB, allowing seamless integration with various devices such as laptops, Blu-ray players, and media streaming devices. This versatility makes it a flexible solution for businesses and educational institutions that require compatibility with a range of presentation tools.

Another remarkable characteristic of the Yamaha DPX-1300 G is its user-friendly interface. The onboard menu provides easy access to settings and adjustments, making it straightforward for users to customize their display preferences. The projector also includes features like keystone correction and lens shift, enabling easy setup and alignment for optimal image placement.

Designed with longevity in mind, the DPX-1300 G features a long-lasting lamp that can provide thousands of hours of operational use, reducing maintenance requirements and total cost of ownership. Additionally, its compact and lightweight design facilitates easy transportation and setup.

In conclusion, the Yamaha DPX-1300 G stands out as a reliable and high-performing digital projector. With its exceptional brightness, advanced optical technologies, wide connectivity options, and user-friendly features, it is well-suited for any professional environment. Whether for corporate use, educational purposes, or events, this projector promises to deliver remarkable image quality and performance.
Top Page Image Contents