Yamaha DPX-1300 G manual Inappropriate places for installation, Accessory check

Page 4

1Getting started

◆Inappropriate places for installation

If this unit is not correctly installed in an appropriate place, it may cause fire or failure, or damage the unit itself. Carefully choose the place to install this unit by avoiding the places listed below.

1.Places where the temperature and humidity vary greatly

•Do not install this unit in a place where the temperature and humidity become extremely high or the temperature becomes extremely low.

•This unit must be used within a temperature range of 5 to 35°C.

2.Places without adequate ventilation

•Install this unit with at least 30 cm (1 feet) of ventilation space on the top, right and left, and back.

•Do not cover the ventilation slots of this unit. Covering the slots will obstruct heat dissipation.

•Install this unit on the firm surface.

•Do not cover this unit with a tablecloth, etc.

•Make sure there is nothing to get sucked into the ventilation slots so that the temperature of this unit does not become too high.

•If you are going to install the unit in a rack, be sure to leave space for ventilation to prevent exhaust overheating the unit.

3.Places where it gets dusty

•If the filter is blocked with dust, the temperature of this unit may become too high.

4.Places with too much vibration or impact

•Vibration and impact can damage parts of this unit.

5.Places where this unit gets exposed to water or high humidity

•If this unit is exposed to water or high humidity, it may cause a fire or electrical shock.

6.Unstable places

•If this unit is installed on an unstable or an inclined tabletop, it may fall and cause damage to the unit or personal injury.

7.In close proximity to a Radio or Stereo

•The unit may interfere with reception if placed in close proximity to a radio or television receiver.

Warning

•To ensure vivid, high contrast images, make sure that no light other than the projector light falls directly on the screen.

◆Accessory check

Please check that all accessories listed here are included in your package.

• Remote control

• Batteries (AA, UM-3 or R6)

• Power cable

AUTO

V. POS

ZOOM

FOCUS

IRIS

SETTING

PATT

ESCAPE

 

MENU

ASPECT

 

INPUT

RESET

 

HIDE

STILL

 

LIGHT

 

INPUT

 

S VIDEO

A

HDMI

VIDEO

B

DVI

 

D4

 

 

MEMORY

 

1

2

3

• Pin/BNC adapters

• Lens cap

456

2

Page 3 Page 5
Image 4
Page 3 Page 5
Contents DPX-1300 Installation OperationOthers For U.K. customersTable of contents Inappropriate places for installation Accessory checkFeatures Features EnglishMain unit Front panel and controls Main unit Rear panel / Connections Controls and functionsRemote control functions Remote control English Light switchRemote control code switch Remote control cable jackLoading the batteries into the remote control Using the remote control with a wired connectionDistance to sensor Angle to sensor Limits for using the remote controlUse within a left/right arc of 30 degrees If you have not installed the main unit or screen PreparationTurn the power on and selecting an image for projection PrepararionMounting the projector on a table Setting up the DPX-1300Mounting the projector on the ceiling Installation When using a 169 screenWhen using a 43 screen Projection distanceKeystone adjustment Using Zoom to adjust image positionUsing V.POS vertical position to adjust image position Using the adjusters to adjust image positionConnecting to AV components ConnectionConnecting to computer devices RGB Digital DVI connectorChecking installation and connections Pre-operation checkProjection English Projection preparations completeTurning the power on Turning the projector power onPress the STANDBY/ON button Button on the remote control Lamp may blink when half lit. This is not a defect Placing the DPX-1300 in standby modePress the STANDBY/ON button Selecting using the Input button Selecting an input signalProjection image signal Projection Using the Input button to select a signalPress the + button to open the submenu Press the Aspect button Selecting a display aspect for a projection imageRemote cotrol Display aspect types Input signal type Input image Display aspect Projected image Representative examplesAdjusting the image Adjusting the vertical position V.POS buttonPattern button Crosshatch pattern Grayscale pattern Color bar patternAdjusting the size of an image Zoom button Menu configurations Menu screenMenu items Menu item listSubmenu Items Lower level menu itemsMenu group items and functions Menu Level Adjustment Adjusts the iris OpticalAdjusts the analog input signal gain and offset settings White PeakingSignal Menu EnglishSignal Level Signal StatusOvershoot Supp. Range Overshoot Supp. LevelInitial Setup Menu Color MessageTrigger Out Baud RateReset button Remote control only Remote ControlMenu operations Operation button functionsMenu operations 1 with no submenu Press the Menu button to openMenu screen Press the + or button to select a menu groupPress the + or button to select a suitable setting Setting method depends on the item selectedRemote Control Main Unit Menu Button Remote Control Main UnitPress the h or g button to adjust item settings Menu operations 2 with submenusPress the + button to move to the submenu Appears to the right of items that contain a submenuSpecial operations See page 32 for datails about each color itemExample Color temperature fixed mode Example Using the color temperature fixed modeName of the selected item appears here Resetting all the settings Resetting the selected settingsChanging the position of the menu screen Resetting the lamp running time Subtitle ZoomChanging the Gamma Press the buttonAdjusting image quality using the inline menu Example Using the inline menuInline menu composition Inline menu item listMemory configurations Saving memory settingsUsing the remote control Using the menuMemory function English Press the g button to select Memory number status fromBottom of the screen Press the h or g button to select a memory numberSetting Memory Lock Memory lockDeactivating Memory Lock Select the memory number youMemory copy Recall the memory number to beCopy source Press the g button to selectPress the + button to display the confirmation screen Press ButtonResetting to the default settings in the memory menu Initialization of the currently selected memoryInitialization of all the memories Glossary ReferenceCompatible signal types Signal type Active Component type Pixels Lines KHz Reference EnglishRegular care MaintenanceReplacing the filter Loosen the lamp cover screws Replacing the lampLamp cover screws Troubleshooting To protect the lamp, you cannot turn onTroubleshooting Message display Message ConditionLED indicator meanings LED indicator State MeaningSpecifications OpticalControls GeneralDimensional drawing 119.1

DPX-1300 G specifications

The Yamaha DPX-1300 G is a cutting-edge digital projector designed for professional applications, combining advanced technology with high-quality performance. This projector is engineered to deliver vibrant visuals, making it an ideal choice for a variety of settings, including corporate presentations, educational environments, and large-scale events.

One of the standout features of the Yamaha DPX-1300 G is its impressive brightness. With a lumens output that can reach up to 3000 ANSI lumens, the projector ensures clear and vivid images even in well-lit environments. This high brightness level, combined with its high contrast ratio, produces sharp details and rich colors that captivate audiences. The projector supports a variety of resolutions, including Full HD, ensuring compatibility with the latest content.

Incorporating Yamaha’s sophisticated optical technologies, the DPX-1300 G utilizes a 3LCD system that promises exceptional color accuracy and smooth image rendering. This technology minimizes the risk of color distortion and ensures that presentations remain true to their original intent. Additionally, the projector features advanced image processing capabilities, which enhance sharpness and reduce noise, providing a polished viewing experience.

The DPX-1300 G supports multiple connectivity options, including HDMI, VGA, and USB, allowing seamless integration with various devices such as laptops, Blu-ray players, and media streaming devices. This versatility makes it a flexible solution for businesses and educational institutions that require compatibility with a range of presentation tools.

Another remarkable characteristic of the Yamaha DPX-1300 G is its user-friendly interface. The onboard menu provides easy access to settings and adjustments, making it straightforward for users to customize their display preferences. The projector also includes features like keystone correction and lens shift, enabling easy setup and alignment for optimal image placement.

Designed with longevity in mind, the DPX-1300 G features a long-lasting lamp that can provide thousands of hours of operational use, reducing maintenance requirements and total cost of ownership. Additionally, its compact and lightweight design facilitates easy transportation and setup.

In conclusion, the Yamaha DPX-1300 G stands out as a reliable and high-performing digital projector. With its exceptional brightness, advanced optical technologies, wide connectivity options, and user-friendly features, it is well-suited for any professional environment. Whether for corporate use, educational purposes, or events, this projector promises to deliver remarkable image quality and performance.
Top Page Image Contents