Yamaha DPX-1300 G manual Troubleshooting

Page 63

Troubleshooting

Problem

Cause

Remedy

Remote control does

The batteries are exhausted.

not work correctly.

 

The remote control sensor is not set

 

 

correctly.

 

 

 

There is a fluorescent lamp near the

 

remote control sensor being used.

 

 

 

The remote control code switch is

 

incorrectly set.

 

 

 

 

COVER warning

The filter cover is not correctly attached.

indicator lights up.

 

The lamp cover is not correctly attached.

 

 

 

 

 

LAMP warning

Lamp running time has exceeded 2000

indicator lights up or

hours.

blinks.

 

The lamp has burned out.

 

 

 

 

 

TEMP warning indicator

The temperature inside the DPX-1300 is

lights up.

extremely high.

 

 

 

 

FAN warning indicator

The fan is broken.

lights up.

 

 

 

Replace both batteries with new ones.

Set correctly.

Press the MENU button to display the menu

and select [Setup] [Remote Control Sensor].

Turn off the remote control sensor near the fluorecent lamp, and use the other remote sensor.

Set the remote control code switch to the same ID number as the setting on the “REMOTE CONTROL ID” in the setting menu.

Tightly attach the filter cover.

Tightly attach the lamp cover.

Replace the lamp with a new one.

Replace the lamp with a new one.

Check that the ventilation slots are not covered.

Contact the store where the DPX-1300 was purchased.

•This unit uses a DMDTM chip for the picture display. Their highly accurate technology makes it possible to keep more than 99.99% of effective pixels, however, unexpectedly it can produce less than 0.01% of ineffective pixels. In such a case, missing or flashing of a few pixels can be found on the screen. These are characteristics of DMDTM , not mechanical problems.

11

Reference

English

61

Page 62 Page 64
Image 63
Page 62 Page 64
Contents DPX-1300 For U.K. customers InstallationOperation OthersTable of contents Accessory check Inappropriate places for installationFeatures English FeaturesMain unit Front panel and controls Controls and functions Main unit Rear panel / ConnectionsRemote control functions Remote control cable jack Remote control EnglishLight switch Remote control code switchUsing the remote control with a wired connection Loading the batteries into the remote controlLimits for using the remote control Distance to sensor Angle to sensorUse within a left/right arc of 30 degrees Preparation If you have not installed the main unit or screenPrepararion Turn the power on and selecting an image for projectionSetting up the DPX-1300 Mounting the projector on a tableMounting the projector on the ceiling Projection distance InstallationWhen using a 169 screen When using a 43 screenUsing the adjusters to adjust image position Keystone adjustmentUsing Zoom to adjust image position Using V.POS vertical position to adjust image positionConnection Connecting to AV componentsRGB Digital DVI connector Connecting to computer devicesProjection preparations complete Checking installation and connectionsPre-operation check Projection EnglishTurning the projector power on Turning the power onPress the STANDBY/ON button Button on the remote control Placing the DPX-1300 in standby mode Lamp may blink when half lit. This is not a defectPress the STANDBY/ON button Selecting an input signal Selecting using the Input buttonProjection image signal Using the Input button to select a signal ProjectionPress the + button to open the submenu Selecting a display aspect for a projection image Press the Aspect buttonRemote cotrol Display aspect types Representative examples Input signal type Input image Display aspect Projected imageCrosshatch pattern Grayscale pattern Color bar pattern Adjusting the imageAdjusting the vertical position V.POS button Pattern buttonAdjusting the size of an image Zoom button Menu screen Menu configurationsMenu item list Menu itemsLower level menu items Submenu ItemsMenu group items and functions Menu White Peaking Level AdjustmentAdjusts the iris Optical Adjusts the analog input signal gain and offset settingsMenu English SignalOvershoot Supp. Level Signal LevelSignal Status Overshoot Supp. RangeInitial Setup Baud Rate Menu ColorMessage Trigger OutOperation button functions Reset button Remote control onlyRemote Control Menu operationsPress the + or button to select a menu group Menu operations 1 with no submenuPress the Menu button to open Menu screenRemote Control Main Unit Press the + or button to select a suitable settingSetting method depends on the item selected Remote Control Main Unit Menu ButtonAppears to the right of items that contain a submenu Press the h or g button to adjust item settingsMenu operations 2 with submenus Press the + button to move to the submenuSee page 32 for datails about each color item Special operationsExample Using the color temperature fixed mode Example Color temperature fixed modeName of the selected item appears here Resetting the selected settings Resetting all the settingsChanging the position of the menu screen Subtitle Zoom Resetting the lamp running timePress the button Changing the GammaInline menu item list Adjusting image quality using the inline menuExample Using the inline menu Inline menu compositionUsing the menu Memory configurationsSaving memory settings Using the remote controlPress the h or g button to select a memory number Memory function EnglishPress the g button to select Memory number status from Bottom of the screenSelect the memory number you Setting Memory LockMemory lock Deactivating Memory LockPress the g button to select Memory copyRecall the memory number to be Copy sourcePress Button Press the + button to display the confirmation screenInitialization of the currently selected memory Resetting to the default settings in the memory menuInitialization of all the memories Reference GlossaryCompatible signal types Reference English Signal type Active Component type Pixels Lines KHzMaintenance Regular careReplacing the filter Replacing the lamp Loosen the lamp cover screwsLamp cover screws To protect the lamp, you cannot turn on TroubleshootingTroubleshooting Message Condition Message displayLED indicator State Meaning LED indicator meaningsGeneral SpecificationsOptical Controls119.1 Dimensional drawing

DPX-1300 G specifications

The Yamaha DPX-1300 G is a cutting-edge digital projector designed for professional applications, combining advanced technology with high-quality performance. This projector is engineered to deliver vibrant visuals, making it an ideal choice for a variety of settings, including corporate presentations, educational environments, and large-scale events.

One of the standout features of the Yamaha DPX-1300 G is its impressive brightness. With a lumens output that can reach up to 3000 ANSI lumens, the projector ensures clear and vivid images even in well-lit environments. This high brightness level, combined with its high contrast ratio, produces sharp details and rich colors that captivate audiences. The projector supports a variety of resolutions, including Full HD, ensuring compatibility with the latest content.

Incorporating Yamaha’s sophisticated optical technologies, the DPX-1300 G utilizes a 3LCD system that promises exceptional color accuracy and smooth image rendering. This technology minimizes the risk of color distortion and ensures that presentations remain true to their original intent. Additionally, the projector features advanced image processing capabilities, which enhance sharpness and reduce noise, providing a polished viewing experience.

The DPX-1300 G supports multiple connectivity options, including HDMI, VGA, and USB, allowing seamless integration with various devices such as laptops, Blu-ray players, and media streaming devices. This versatility makes it a flexible solution for businesses and educational institutions that require compatibility with a range of presentation tools.

Another remarkable characteristic of the Yamaha DPX-1300 G is its user-friendly interface. The onboard menu provides easy access to settings and adjustments, making it straightforward for users to customize their display preferences. The projector also includes features like keystone correction and lens shift, enabling easy setup and alignment for optimal image placement.

Designed with longevity in mind, the DPX-1300 G features a long-lasting lamp that can provide thousands of hours of operational use, reducing maintenance requirements and total cost of ownership. Additionally, its compact and lightweight design facilitates easy transportation and setup.

In conclusion, the Yamaha DPX-1300 G stands out as a reliable and high-performing digital projector. With its exceptional brightness, advanced optical technologies, wide connectivity options, and user-friendly features, it is well-suited for any professional environment. Whether for corporate use, educational purposes, or events, this projector promises to deliver remarkable image quality and performance.
Top Page Image Contents