Yamaha DPX-830 owner manual Auto / Auto Sync buttons, Connecting to a notebook computer

Page 24

To stop projecting:

1.Press the STANDBY/ON () button on the projector or the STANDBY ( ) button on the remote control.

•A confirmation message is displayed.

•To cancel the procedure, wait a while or press the MENU button.

2.Press the STANDBY/ON () button on the projector or the STANDBY ( ) button on the remote control again.

•The lamp goes out and the projector goes into a cooling period. In this condition, the POWER indicator turns red and the STATUS indicator blinks green.

3.Wait about one minute for the STATUS indicator to be off and the POWER indicator to be steadily lit in red.

•During this one minute period, the intake and exhaust fans rotate to cool the lamp.

•The fans may make loud sound during the cooling period.

Caution

•Do not unplug the power cable while the STATUS indicator is blinking. Unplugging the power cable immediately after use could damage the lamp or reduce lamp life.

AUTO / AUTO SYNC buttons

When the image being input from the computer is displaced, carry out the following procedure:

1.Disable the screen saver if it has been enabled.

2.Display a bright image (such as a full-screen display of the Recycle Bin window).

3.Press the AUTO button on the remote control or the AUTO SYNC button on the projector. The projector automatically makes optimum positional settings for the input signal.

•If the image is not projected in the correct position even after you press the AUTO or AUTO SYNC button several times, change the settings in the SIGNAL menu to put the image in the correct position (see page 31).

•When you carry out this procedure with a dark image, the image may be displaced.

Connecting to a notebook computer

When the projector is connected to a notebook computer, images may not be projected in some cases. If this happens, set the computer so that it can output signals externally. The setting procedure varies depending on the type of the computer. Refer to the instruction manual of your computer.

20

Page 23 Page 25
Image 24
Page 23 Page 25
Contents DPX-830 Important Safety Instructions For Canadian customersFCC Information for US customers only USAEuropean compliance notice For U.K. customersIii GREEN-AND-YELLOWTable of contents Inappropriate places for installation Getting startedAccessory check Power supply partsRemote control parts CablesInserting the batteries into the remote control Remove the rear lid of the remote controlThem correctly, inserting their side first Attach the rear lidControls and functions Projector overviewControl panel Rear panelRemote control overview Using the picture quality adjusting buttonsUsing the remote control Operational rangeReception angle Vertical directionsInstallation Setting up the screenAdjusting the projection angle Mounting the projector on the tableMounting the projector on the ceiling Optional partWhen the aspect ratio of the screen is Screen size and projection distanceConnections Basic home theater system connectionConnecting to a video player, etc Connecting to a DVD player or Hdtv decoderUsing the Video terminal Using the S-VIDEO terminalHdmi or DVI connections SUB connectionsConnecting to a computer For analog connectionsFor digital connections Plugging in the power cable With the Setup menuTrigger terminal To exit from the menuConfirm the Power indicator lights up red ProjectionViewing video images PreparationKeystone adjustment Press the Iris button on the remote controlIris button To stop projectingSetting the aspect ratio With the remote control With the Initial menuExamples of the aspect ratio Aspect buttonViewing computer images Connecting to a notebook computer Auto / Auto Sync buttonsMenu Menu overviewHow to set the menus Menu settings Image menuSetup menu Initial menu Signal menu Adjusting video images Selecting the gamma mode GammaCustomizing the gamma mode Gamma Adjusting brightness Contrast and BrightnessSelecting the color temperature Color Temp Customizing the color temperature Color TempAbout color temperature To activate the stored color temperature settingsAdjusting color Saturation and HUE Sharpening or softening images SharpnessLPF Progressive filter Saving memory settings To activate the stored memory settingsPress one of the Memory buttons on the remote control Memory functionAdjusting computer images Simple method to adjust the image positionTo adjust the horizontal position To adjust the vertical positionInterval of lamp replacement Replacement lamp cartridge OptionReplacing the lamp Spare lampMaintenance Cleaning the projector and the ventilation grillesCleaning the lens Reset of the lamp operation timeAttaching a lens filter and cap Attaching a commercially available lens filterAttaching the lens cap Troubleshooting No image appears on the screenImages are not displayed correctly Others Indicators Normal conditionsAbnormal conditions Specifications Projector specificationsComposite / S-video signal specifications Component signal specificationsDigital RGB Component Signal specifications Analog RGB Signal specificationsDimension drawings ConnectorsAll rights reserved

DPX-830 specifications

The Yamaha DPX-830 is a sophisticated digital projector designed to meet the demands of various audiovisual applications, including home theaters, corporate presentations, and educational environments. Renowned for its high-quality image projection and advanced technological features, the DPX-830 provides a seamless user experience and impressive performance.

One of the standout features of the Yamaha DPX-830 is its high-resolution imaging capability. It offers a native resolution of 1920 x 1080 pixels, also known as Full HD. This ensures that visuals are sharp and detailed, making it perfect for displaying high-definition content. With a brightness rating of 3000 ANSI lumens, the projector performs well even in well-lit environments, ensuring vibrant colors and clear images without significant loss of quality.

The DPX-830 utilizes advanced DLP technology, which offers superior color reproduction and contrast ratios, resulting in deep blacks and vibrant colors. The use of a lamp life of up to 4000 hours reduces maintenance hassles and operating costs, making it an economical choice for users.

Another significant characteristic of the Yamaha DPX-830 is its versatile connectivity options. It features multiple input ports, including HDMI, VGA, and composite video, allowing users to easily connect various devices such as laptops, Blu-ray players, and streaming devices. This flexibility makes it an ideal choice for both personal and professional use.

In terms of audio capabilities, the DPX-830 is equipped with built-in speakers that deliver clear sound, enhancing the overall presentation experience. For users seeking enhanced audio performance, the projector can be connected to external sound systems via audio output ports.

The projector also includes a user-friendly interface that simplifies the setup and operation process. Features like automatic keystone correction and optical zoom facilitate easy adjustments to fit different projection environments. Its compact and lightweight design ensures that it can be easily transported, making it suitable for mobile presentations.

Overall, the Yamaha DPX-830 combines high-resolution imagery, DLP technology, versatile connectivity, and user-friendly operation, making it an excellent choice for anyone seeking a reliable and high-performing projector. Whether in a home theater setting or professional environment, the DPX-830 stands out as a powerful tool for delivering captivating visual content.
Top Page Image Contents