SpeedStream Wireless PCI Adapter User’s Manual
Driver installation for Windows NT4.0
This installation procedure assumes that you have installed the network component on your computer.
To check whether the network component has been installed, double click the Network icon in the Control Panel. If it has not been installed, refer to the Windows NT 4.0 installation guide for instructions on installing the component.
Follow the steps below to install the driver.
1.Insert the SpeedStream Wireless PCI Adapter into the PCI slot of the desktop PC as directed and power on the computer. (Refer to Chapter 2 – Hardware installation.)
2.Log in to NT 4.0 as Administrator.
3.Double click the Network icon in the Control Panel, and select the Adapters tab as shown in the following screen. Click Add to add a new adapter and OK to continue.
23