How to Use Your Deep Sleep
Once you have decided where to place your Deep Sleep for optimal results, follow these steps to create your perfect sleep environment.
1.Press the POWER button (Fig 1)
2.Press the 
button to scroll through the sound selections. Each tone name will light up as selected. We have FOUR distinct
Soothe: Like a soft rain, this tone has the lightest pitch- easing your mind gently
Mask: Effectively blocks external distractions including noisy neighbors and highway traffic
Relax: Modulated to disrupt interfering room noise, such as snoring
Calm: The deepest of all tones- perfect for tinnitus sufferers or small children
3.Once you select the tone that suits your needs, you can adjust the sound by pressing the TONE button (Fig 1) up and down. Press and hold the “+” symbol to remove bass and achieve a higher pitch. Press and hold the
4.Finally, to adjust the VOLUME, press and hold the “+” or
Your Deep Sleep unit is now set. When you wake in the morning and power off the
Power ON/OFF
Timer ON/OFF
30 | 60 | 90 | Fig. 2 |
|
|
|
Using the Auto-Timer
1.When the power is on and you are listening to a white noise tone, you may set a timer so the unit will automatically turn off.
2.Toggle through the TIMER button (Fig. 2) until the corresponding LED illuminates next to the time of your choice, 30, 60 or 90 minutes. The unit will automatically shut off after the selected time and the POWER LED (Fig. 2) will remain lit showing you it is still in timer mode.
If you chose to listen to another timed sound, press the timer button to select a desired time. Or if you choose to listen to the sounds continuously, turn the unit off and then back on.
NOTE: Do not select the TIMER button if you wish to listen to the sounds continuously.
Maintenance
To Store
You may leave the unit on display, or you can store it in its box in a cool, dry place.
To Clean
Wipe off dust with a damp cloth. NEVER use liquids or abrasive cleaner to clean. Modifications not authorized by the manufacturer may void users authority to operate this device.
FCC Disclaimer
NOTE: This device complies with Part 15 of the FCC guidelines. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user in encouraged to try to correct the interference by one or more of the following measure:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
4 | 5 |