AudioQuest M-27 Dumping Raw Data, HL3 Print, Changing Printer Parameters, Specifications

Page 6

Dumping Raw Data

 

The data stored in the unit may be transferred to a computer or printer for reprocessing. This data

is useful only with additional computer programs. Consult Quest for programs.

CODE

Press key until CPU is displayed.

HL3

 

PRINT

Prints raw data to computer.

ON

Stops printout.

OFF

 

Changing Printer Parameters

Internal switch 3 contains the printer parameters. This switch may be changed without erasing stored data. This allows switching printers or computers without destroying data (See Printer Setup, page

32).NOTE

Internal switches 1 and 2 are read only when the unit is RESET.

SPECIFICATIONS

Standards:

ANSI S1.4-1983 type 2

 

ANSI S1.25-1978

 

IEC 651 type 2

UL Intrinsic Safety:

 

Class I Group C, D

 

Class II Group E, F

 

Class III

Detector:

True RMS; 63 dB pulse range

Display:

Liquid crystal display

 

Range: .01 to 2999

 

Annunciators: HTL, LTL, 3 dB, LOBAT, RUN, and PAUSE

Printout:

RS-232 serial at 300, 600, 1200, or 2400 baud

 

or Centronics parallel Connector: 20 pin shrouded header

Microphone:

8 mm PZT ceramic, 36-inch cable, field replaceable

Battery:

Single 9-volt alkaline, 80-hour battery life

Image 6
Contents Table of Contents FCC Compliance and Cautionary Note IntroductionControl Keys RUN Pause Reset OFFSimplified Operating Instructions CodeDosimeter Keys Procedure to Accumulate Event DataSound Level Meter Keys Time KeysSetting the Clock Using a PrinterRecording the Calibration Level HL3 Print SpecificationsDumping Raw Data Changing Printer ParametersPrinciples of Operation Weighting CharacteristicsGeneral Description GeneralMicrocomputer Modes Battery Replacement Testing and CalibrationBattery Test WhereOperating Procedure As an Area Monitor As a Survey or Event MonitorEvents Effects of Operators PresenceUse with Windscreen Connections to Printer Sample PrintoutsPage Page 03CO-1FFF Memory MapMemory Location Data Editing PrintoutPrinter Setup Extending Battery LifeDSR Internal Switches Switch Positions SwitchSetting Internal Switches Code Decoding Troubleshooting Interpreting ResultsUse of Lavg and TWA Estimating TWA from Lavg Accuracy of ReadingsHints and Good Practices Accessories Service Policy

M-27 specifications

AudioQuest M-27 is a standout speaker designed for audiophiles who demand high performance and exquisite sound quality. As part of AudioQuest's commitment to providing unparalleled audio experiences, the M-27 blends advanced technologies with premium materials to deliver exceptional musical clarity and accuracy.

One of the key features of the M-27 is its innovative driver design, which utilizes a new-generation ceramic cone. This cone is engineered to minimize distortion while enhancing transient response. The result is a speaker that offers a clear, detailed sound across a wide frequency range. The drivers are also matched with an advanced neodymium magnet system, ensuring efficient energy transfer and improved bass response.

The M-27 is equipped with a sophisticated crossover network that has been meticulously designed to maintain the integrity of the audio signal. By employing high-quality components, including precision resistors and capacitors, the crossover effectively divides the audio signal into specific frequency bands, allowing each driver to perform at its best. This attention to detail not only enhances sound quality but also helps to create a more cohesive listening experience.

Another notable characteristic of the M-27 is its sturdy and well-constructed cabinet. Built from high-density MDF, the cabinet is engineered to minimize resonance and vibration, which can color sound. Moreover, AudioQuest has incorporated internal bracing to further enhance structural integrity. The elegantly finished exterior not only adds to the speaker's aesthetic appeal but also serves to complement various home decors.

Connectivity is made simple with the M-27, thanks to its standard speaker terminals that accommodate a wide range of wire gauges. This flexibility allows audiophiles to use their preferred cables for optimal performance. Additionally, the speaker is designed to work seamlessly with a variety of amplifier configurations, making it an adaptable choice for different audio setups.

Incorporating these advanced technologies and design principles, the AudioQuest M-27 is not just a speaker; it's a gateway to an immersive listening experience. With its ability to reproduce sound with remarkable accuracy, it will appeal to discerning listeners looking to elevate their audio playback and enjoy their favorite music in a whole new light. Overall, the M-27 stands as a testament to AudioQuest's dedication to crafting high-quality audio products that meet the needs of serious music enthusiasts.