Operation, Specifications LSC-BG | JobSite Systems instruction

4.There are four clamps “dogs” which hold each speaker in place. Rotate all the dogs inward.

5.Insert the loudspeaker into the cutout in the ceiling.

6.The dogs are tightened via four front-baffle screws. Tighten the dogs by turning the screws clockwise, while pressing the loudspeaker against the ceiling. NOTE: DO NOT OVER TIGHTEN THESE SCREWS. Over- tightening the screws may make the grille difficult to install.

8.Install the grille into the speaker.

9.Repeat this procedure for the next speaker.

Removing the Grilles:

To remove the grille from the LSC-BG, obtain a small paper clip (size #1, common) and bend the last quarter inch of it into an “L” shape. Holding the paper clip with a pair of pliers, insert the end with the “L” into a hole near the edge of the grille. Remove the grille by pulling the paper clip towards you.

Painting the Speakers:

The speakers must be masked prior to painting them. The inside circular portion of the hole template can be used as a paint mask. Remove the outside portion of the template by gently pulling along the perforation. Affix the mask to the front of the speaker using a piece of tape. Fold the tape onto itself to form a double-sided loop. Affix the tape to the tweeter and place the mask onto the speaker.

Painting the Grilles:

The LSC-BG grilles should be painted before they are installed on the speakers. The best results will be obtained by using a spray gun or airless sprayer. Thin the paint, and then apply several light coats. This technique helps prevent clogging of grille

holes. Paint both sides of the grille to cover all the white paint.

OPERATION

Listening at Higher Volumes

It requires more power to achieve a reasonable volume of sound in a large room than it does in a small room. It is possible to turn the volume so high that the amplifier runs out of power. This creates “clipping” distortion.

Clipping distortion makes treble sound very harsh and unmusical. When you hear harsh sounding treble from any good speaker, turn the volume down immediately! You are much less likely to damage a speaker with a large amplifier because it will be more difficult to produce clipping distortion.

SPECIFICATIONS: LSC-BG

Power handing:

5 – 75 watts

Frequency response: 55Hz-20kHz +/- 4dB

Impedance:

8 ohms

Dimensions:

9-1/4” outside frame diameter 8” diameter hole cutout

2-3/4” deep when installed in 1/2” drywall

Ceiling Bracket for New Construction: JobSite NCB-6 (sold separately)

Warranty: 5 year limited

LSC-BG specifications

JobSite Systems LSC-BG is a cutting-edge software platform designed specifically for the construction industry, offering a comprehensive solution to streamline operations and enhance project management. Its primary aim is to facilitate better communication and collaboration among teams working in the field. This platform integrates various technologies and features that cater to the complex requirements of construction projects.

One of the standout features of JobSite Systems LSC-BG is its robust project management tools. These tools enable users to create, track, and manage tasks and deadlines efficiently. The intuitive interface allows team members to assign responsibilities, monitor progress, and adjust timelines as necessary. This level of organization helps to reduce delays and keeps projects on track.

The platform also incorporates real-time data analytics, providing users with valuable insights into project performance. With dashboards that display key performance indicators, team leaders can quickly assess productivity levels and identify areas for improvement. This data-driven approach supports informed decision-making, ultimately enhancing project outcomes.

JobSite Systems LSC-BG leverages mobile technology to keep teams connected, regardless of their location. The mobile app allows workers to access important project information, update task statuses, and communicate seamlessly with colleagues in real time. This mobility ensures that everyone is on the same page, significantly improving coordination and efficiency on construction sites.

Moreover, the software is built on a cloud-based architecture, ensuring that all project data is securely stored and easily accessible. This cloud integration means that users can collaborate from anywhere, eliminating the need for physical meetings and reducing project delays caused by geographic constraints.

The system also emphasizes safety management, incorporating features that help teams monitor compliance with safety protocols and regulations. Users can conduct safety inspections and track incidents directly through the platform, promoting a culture of safety that is paramount in the construction sector.

In addition, JobSite Systems LSC-BG supports integration with other essential software tools, allowing businesses to customize their workflows and maintain existing applications. This compatibility ensures that companies can transition to the platform without disrupting their established processes.

In summary, JobSite Systems LSC-BG stands out as a versatile and powerful solution for the construction industry, embodying essential features like project management, real-time analytics, mobile access, cloud storage, safety management, and seamless integration with other tools. Its comprehensive capabilities make it an indispensable resource for enhancing productivity and collaboration in construction projects.