JVC DLA-G150CLE Optical mechanism system, Electrical system, Input terminals, Output terminal

DLA-G150CLU

DLA-G150CLE

Specifications

■Optical mechanism system

• Projection method	D-ILA	® (Direct Drive Image Light Amplifier) method
	(Reflective-type active-matrix method)

•D-ILA ® device

•Projecting lens

0.9" (2.3 cm) measured diagonally (1365 pixels			⋅ 1024 pixels)	⋅ 3
(Total number of pixels : 4,193,280)
GL-M2910G:	1:1
GL-M2915SG:	1.5:1 (with ±2% zooming/shift function)
GL-M2920ZG:	⋅	1.5 zoom lens (2:1 to 3:1) (zooming function)
GL-M2930SZG:	⋅	1.9 zoom lens (2.9 to 5.5:1) (zooming/shift function)

• Screen size	GL-M2910G:
	GL-M2915SG:
	GL-M2920ZG:
	GL-M2930SZG:

Refer to page 76. Refer to page 76. Refer to page 77. Refer to page 77.

• Projection distance	GL-M2910G:
	GL-M2915SG:
	GL-M2920ZG:
	GL-M2930SZG:

Refer to page 76. Refer to page 76. Refer to page 77. Refer to page 77.

• Light-source lamp 420 W xenon lamp

■Electrical system

•	Color system	NTSC, NTSC4.43, PAL, SECAM (Automatic switching / manual switching)
•	Resolution	1365 dots	⋅ 1024 dots (S-XGA full resolution, during RGB input)
		1000 TV lines (Horizontal resolution, aspect ratio 4 : 3, during video input)
•	Scanning frequency	Horizontal frequency : 15 kHz ~ 105 kHz
		Vertical frequency		: 50 Hz ~ 100 Hz
•	Audio power output	1 W (monaural), 1-		5 /8" (4 cm) round type micro-speaker	⋅ 1

■Input terminals

[AV	IN]
•	Y/C	1-line, mini-DIN 4 pin				⋅ 1 (for S-video)
•	VIDEO	1-line, BNC	⋅	1	(for composite video)
		1-line, BNC	⋅	3	(for computer, DTV or video)
•	Y, B-Y, R-Y	Component (Y, B-Y, R-Y) signal
•	Y, BP, P R	DTV-format (Y, P B , P R ) signal

[PC	1]
•	R, G, B, H, V	1-line, D-sub 3-row 15 pin			⋅ 1 (for computer)
[PC	2]
		1-line, BNC	⋅ 5 (for computer, DTV or video)
•	R, B, G	Analog RGB signal
•	H/C s , V	Horizontal (H) sync/composite (C S ) sync, Vertical (V) sync signal
[DVI]		1-line, DVI-D 24-pin		⋅	1
[CONTROL]
•	RS-232C	1-line, D-sub 9-pin		⋅ 1

*RS-232C-interface specified control terminal for controlling this projector with a personal computer.

• REMOTE1-line, stereo mini-jack ⋅ 1

* Remote terminal for connecting with the remote control unit.

■Output terminal

•	PC OUT	1-line, D-sub 3-row 15-pin	⋅ 1 (output for display monitor)
•	CONTROL OUT	1-line, D-sub 9-pin	⋅ 1

*RS-232C-interface specified control terminal for controlling this projector with a personal computer.

70

1-36 No.51931