Replacing the
■Be sure that the power cord is unplugged from the wall outlet.
1 Remove the
| Replacing the |
3 Insert the new | |
inside and fasten the screws. | |
Fasten the two screws with a |
|
Loosen the two screws with a
CAUTION |
Note
•The screws are fitted so that they do not come off the lamp- replacement opening cover.
No. |
|
51931 | 2 Loosen the screws, raise the handle, |
| |
| and pull out the |
| Loosen the two screws with a |
Note
•The screws are fitted so that they do not come off the light- source lamp.
Screw
Be careful not to damage the claw.
Screw
• Do not touch the glass surface of the |
|
directly with your hand as well as staining it. If you touch |
|
with a bare hand, oils and other substances on your hand |
|
may adhere to the lamp, possibly preventing it from |
|
performing as specified and therefore giving a shortened |
|
lamp life, a darkened screen, etc. To handle a new light- |
|
source lamp, hold it by the plastic part. Never touch the | Handle |
metal part or the front glass surface. |
4Replace the lamp-replacement opening
cover and fasten the screws.
Fasten the two screws with a
CAUTIONS
• Install the
switch is activated to prevent the projector from operating.
• If the claw on the
5Reset the lamp use time.
Perform “Resetting the Lamp Use Time” on page 62.
Screw
Be careful not to damage the claw.
DEUTSHENGLISH
Handle
(To be continued on the next page)
60
1-31
61
ESPAÑOLITALIANO FRANÇAIS