Menu Operations
Set up for Watching Image Software (Video Menu Mode Only)
This unit has a function which allows you to project movies, which were recorded on film, in the best possible conditions. (Function to convert
Normally use set to AUTO.
1Press the MENU button.
The main menu appears on the screen.
2 Select “Set up” with the cursor button5 or ∞, and press3 or the ENTER button.
Menu Operations
Adjusting Picture Quality
In the “Image adj.” submenu, adjust brightness, contrast, sharpness, etc. to obtain the desired picture quality. Note that the adjustment items differ in Video menu mode and PC menu mode.
1Press the MENU button.
The main menu appears on the screen.
2 Select “Image adj.” with the cursor button5 or ∞, and press3 or the ENTER button.
The “Image adj.” submenu appears on the screen.
The “Set up 1” submenu appears on the screen.
3 Select “Set up 2” with the cursor button5 or ∞, and press3 or the ENTER button.
The “Set up 2” submenu appears on the screen.
4Select “Deinterlace” with the cursor button5 or ∞.
5 Select the Deinterlace function mode with the cursor button 2 or 3.
Video: When watching images recorded with a video camera
Film: When watching images recorded on film
AUTO: The setting is changed automatically
Video submenu
Image adj.
Contrast 12
Brightness 12
Color12
Tint12
Sharpness1
All reset | ENTER |
PC submenu
Image adj.
Contrast | 12 |
|
|
|
|
Brightness | 12 |
|
|
|
|
Sharpness | 1 | 2 | 3 | 4 | 5 |
All reset | ENTER |
|
|
|
|
No.51931
6Press the EXIT button to return to the previous menu or press the MENU button to exit the menu mode.
Note
•Operates when the signal is an NTSC or PAL interlace signal. Does not operate for other signals. (The menu is not displayed when other signals are inputted.)
48
3Select the item to be adjusted with the cursor button5 or ∞.
*“Color” and “Tint” are shown in Video submenu only.
4Make adjustment with the cursor2 or 3.
*To adjust multiple items, repeat 3 and 4.
Adjustment item | Button |
|
|
|
|
|
| Adjustment content | |
|
|
|
|
|
|
| |||
Contrast | 2 or3 | Gets lower/higher. |
| ↔ | 0* ↔ | +30) | |||
|
|
|
|
|
|
| |||
Brightness | 2 or3 | Gets darker/brighter. | ↔ |
| 0* ↔ | +30) | |||
|
|
|
|
|
| ||||
Color | 2 or3 | Gets softer/deeper. | ↔ | 0* ↔ | +30) | ||||
(Video menu mode only) |
|
|
|
|
| ||||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| |||
Tint | 2 or3 | Gets reddish/greenish. |
|
| ↔ | 0* ↔ +30) | |||
(Video menu mode only) |
|
|
|
|
| ||||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| ||
|
| Gets softer/sharper. |
| ↔ | 0* ↔ |
| |||
|
| • Video menu mode: |
| +5) | |||||
|
| • PC menu mode: (1 | ↔ | 3* ↔ | 5) |
| |||
Sharpness | 2 or3 |
|
|
|
|
|
|
|
|
| Note |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| |
|
| • When in the PC menu mode, if the resize function in the PC submenu is set to | |||||||
|
|
| “1:1”, the image quality will not change even if the value is changed. | ||||||
|
|
| |||||||
All reset | ENTER | Resets above items to the factory set values. How to operate is mentioned below | |||||||
(next page). |
|
|
|
|
| ||||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
* : Factory set value |
|
|
|
|
|
|
|
|
|
■ To perform All Reset
• In the Image adj. submenu, select “All reset” with the cursor button | 5 or∞, and press the ENTER button. Then, the “All |
reset” submenu appears on the screen. |
|
•Press the cursor button 2 to select “Yes”, and then press the ENTER button.
•All items in the “Image adj.” submenu are reset to the factory set values and the menu returns to the previous one.
To exit the “All reset” submenu without performing All reset, select “No” with the cursor button | 3 and, press the ENTER |
button. |
|
(To be continued on the next page) |
|
49
ESPAÑOLITALIANO FRANÇAISDEUTSHENGLISH