No.51931
Installing the Projector
Setting the Amount of Lens Shifting
When the lens unit (optional) with the lens shifting function is used, the projected screen can be shifted up and down in position.
Notes
•The amount of shifting is within the range of approx. 30% to 55%.
•After finishing the lens shift setting, tighten the SHIFT LOCK fixing bolt firmly so that the lens will not move.
1Turn the cap on the top of the projector to open it.
2Loosen the SHIFT LOCK fixing bolt.
Use the hex. wrench supplied.
3Rotate the LENS SHIFT knob to adjust the position (shift amount) of the projected
screen.
Rotate it to the right: The lens shifts upward.
Rotate it to the left: The lens shifts downward.
4Tighten the SHIFT LOCK fixing bolt firmly.
Use the hex. wrench supplied.
5Turn the cap to close it.
SHIFT LOCK fixing bolt
LENS SHIFT knob
■Projected screen position image by amount of shift
* The projected screen position can only shift in an
The illustration shows the screen shifted sidewise for the purpose of explanation.
Approx. 55%
Approx. 50%
Approx. 30%
19
ESPAÑOLITALIANO FRANÇAISDEUTSHENGLISH
Installing the Projector
Effective Range and Distance of the Remote Control Unit
The remote control unit can be used as either a wireless remote control unit or a wired one.
■Using as a wireless remote control unit
Aim the remote control unit toward the remote sensor on the front or the rear of the projector.
The operable distance of the remote control unit is about 10 m for direct reception. The remote control unit can be used by having it reflected on the screen. In this case, the total distance of “A+B” should be about 10 m or less. The operable angles of the remote control unit are 15° right and left, and 15° up and down.
Screen
15˚
| 15˚ |
Projector | 15˚ |
A | |
| 15˚ |
B
Remote control unit
20