Installing the Projector
Adjusting the Inclination of the Projector
The vertical angle and the leveling of the projector can be adjusted with the adjustable feet at the bottom of the projector.
■Adjusting the vertical angle of the projector
While pushing the levers on both sides upward, raise the projector. The adjustable feet automatically extend.
To retract the feet, push the levers and lower the projector slowly; the projector is fixed at the position where you release the levers.
lever
Adjustable feet (at the front)
■Leveling the projector
No.51931 | Lift the projector, rotate the rear adjustable foot, and adjust the horizontal angle until the projector is level. |
|
Installing the Projector
Installing the Projector against the Screen
The projector should be placed so that the center line of the lens is at a right angle to the screen as shown in the following figures.
■ Side view |
|
|
|
|
|
| ■ Top view | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
■
The projector has a function to correct the trapezoidal distortion of the projected image on the screen.
To correct this distortion, use the KEYSTONE buttons on the projector. (Refer to “Removing the Trapezoidal Distortion of the Image” on page 35.) Also, correction is possible by using the “Keystone” menu. (Refer to “Setting and Adjusting Other
Functions (OPTIONS)” on page 54.)
Correctable angle: | Correctable angle: |
Adjustable foot (at the rear)
Fixing foot (at the rear)
Extend Shorten
16
Up to approx. 20° upward from the horizontal line | Up to approx. 20° downward from the horizontal line |
17
ESPAÑOLITALIANO FRANÇAISDEUTSHENGLISH