Philips FW-V320/21 manual View Clock, Clock Setting, Timer Setting

Clock/Timer

En

VCD MP3-CD MINI HIFI SYSTEM

glis h

STANDBY-ON

JOG

CD1 • 2 • 3

BAND

TAPE 1 • 2

CDR/VIDEO

CONTROL

VCD

TUNER

TAPE

AUX

PAL/NTSC

B

ALBUM +

MP3-CD

TITLE +

D

B

L

A

M

I

T

P

C

O

Z

SEARCH•TUNING

STOP•CLEAR PLAY• PAUSE PREV▲ PRESET▲ NEXT

E

Z

V

A

DEMO STOP

J

K

PROGRAM RECORD DUBBING A.REPLAY

DIM

INCREDIBLE

SURROUND

C

O

R

C

O

S

H

N

MICROPHONE - LEVEL

D

C

E

T

PBC RETURN CLOCK•TIMER

VOLUME

View Clock

You can view the clock (if it is set) if the system is in Standby mode or when any sound source is selected (VCD,TUNER, etc.). The clock will be displayed for about seven seconds.

¶Press CLOCK•TIMER briefly (on the system only).

➜“PM10:38 or 22:38” (the current time) will be displayed depending on whether you have selected 12- or 24-hour mode.

➜“--:--” will be displayed if the clock is not set.

Clock Setting

The clock can be set in either 12- or 24-hour mode, e.g. “AM12:00“ or “00:00“. Before setting the clock, you must be in the View Clock mode.

Notes:

–During clock setting, if no button is pressed within 90 seconds, the system will exit clock setting mode automatically.

–When a power interruption occurs, the clock setting is erased.

Timer Setting

¶The system can switch on to VCD ,TUNER or TAPE 2 mode automatically at a preset time. It can serve as an alarm to wake you up.

¶Before setting the timer, make sure the clock is set correctly.

¶The timer will always be switched on once it is set.

¶The volume of the timer will increase from the minimum level to the most recently selected volume level.

1Press CLOCK•TIMER to select clock mode.

2Press PROGRAM to select 12- and 24- hour mode.

➜If 12-hour mode is selected, “AM12:00“ starts flashing.

➜If 24-hour mode is selected, “00:00” starts flashing.

3Set the hour with à or á on the system.

4Set the minute with í or ëon the system.

5Press CLOCK•TIMER again to store the setting.

➜The clock starts.

¶To exit without storing the setting, press Ç on the system.

28

pg 01-32/V320/21-Eng 28

1Press and hold CLOCK•TIMER for more than two seconds to select timer mode.

➜“AM12:00” or “00:00" or the last timer setting starts flashing depending on whether you have selected 12- or 24-hour mode.

➜The TIMER starts flashing.

➜The selected source is lit while other available sources are flashing.

2Press VCD , TUNER or TAPE to select the desired source.

¶Before selecting VCD or TAPE, make sure a disc or tape is loaded in the disc tray or tape deck 2.

3139 115 20852

28/05/2001, 09:02 AM