CONTROLLING X-10
MODULES
If you have already installed the Transceiver Module, you can control it and other
1.Press and release the
2.Use the number buttons to enter the Unit Code number of the chosen module. (You do not need to enter ‘0’ first for a single digit number.)
3.Press the appro- priate button for the function you require (see below).
| |
On: | CHANNEL + |
Off: | CHANNEL – |
Bright: | VOLUME + |
Dim: | VOLUME – |
All Lights On: | POWER |
All Modules Off: | MUTE |
Note: You cannot dim or brighten an Appliance Module. If the module was off and you press Bright or Dim (VOLUME+ or
TO SET THE X-10 SLEEP TIMER
The
1.Press and release the
2.Press and hold TIMER until the LED indicator lights steadily. Release TIMER button.
3.Use the number buttons to enter the module Unit Code for the module to be turned off.
4.Press the desired function button (e.g. CH - to turn the module off after the preset time).
5.Using the number buttons enter the sleep time required (1 to 99 mins).
6.Press ENTER to confirm the setting.
CHANGING THE X-10 HOUSE CODE:
The Learning SuperRemote defaults to House Code A, and in most cases you will not need to change this unless you are experiencing interference from a neighboring
1.Press and release the
32 | 33 |
