SETTING THE SLEEP TIMER
The Sleep Timer automatically turns off the TV after the time you set. Press the TV button, then follow the instructions below to set the Sleep Timer:
1.Press and hold TIMER until the LED indicator lights steadily. Release TIMER button.
2.Use the number buttons to enter the sleep time required (1 to 99 minutes).
3.Press ENTER to confirm the setting.
Note: Make sure you leave the remote pointing at the TV to ensure it turns off the TV at the time you set.
LEARNING
Your UR24A Learning SuperRemote has the codes for most TVs, VCRs, etc. in its code library. However, if the code for your particular device is not found in the library, you can learn these codes from your existing remote. Or if you find a code from the tables in this manual that “almost” matches your device, but a few buttons are missing, you can learn just those buttons.
1.Point your existing remote at the SuperRemote with a distance of about 2 inches between the remotes.
2.Press and hold SETUP until the LED indicator lights steadily. Release the Setup button.
3.Press the mode button that matches the equipment you want to learn. The LED blinks once.
4.Press and release the LEARN button. The LED blinks once.
5.Press and release the button on the SuperRemote that you want to teach. The LED blinks once. (Press shift first to learn a shifted function).
See notes on pages 30 and 31.
28 | 29 |
