Parts List
NOTE: This mount is shipped with all proper installation hardware and components. Make sure that none of these parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the installation and contact InFocus Corporation
M6 x 12mm
Phillips Head
Screws (Qty 3)
M6 x 12mm
Angle Locking
Screws (Qty 2)
M6 x 12mm Hinge Pin Screws (Qty 2)
Flat Washers (Qty 2)
Conical Spacers (Qty 2)
#14 Wood Screws (Qty 2)
M5 Set Screw (1ea)
Installation Tools
Phillips Head Screw Driver | Portable Drill |
Soft Material/ Blanket | Pencil |
1/8” Drill Bit | Level |
Tape Measure | M5 Allen Wrench |
Ladder |
|
Installation Manual | Page - 5 - |