Mount Installation
1.Invert the projector and place it on a soft and flat surface. Locate the three (3) 6 (mm) mounting points found on the bottom of the projector.
2.Secure the mounting bracket using the three (3) 6 (mm) x 12 (mm) Phillip Head screws (supplied).
3.Do not over tighten the screws!
Figure 5
1. Install the base box securely to the ceiling structure in accordance with proper commercial standards. Use (commercially available) suitable hardware depending on the installation requirements.
NOTE: If an extension adapter is to be used, InFocus has a variety of different adapters that can be purchased. Please contact Customer Service.
Figure 6
Installation Manual | Page - 9 - |