Required Tool

Phillips Head Screwdriver

Use of connecting bolts when assembling the components

Step1: Use a Phillips Head Screwdriver to attach the Connecting Bolt to the furniture components (unit-A).

Step2: Insert the exposed section of the connecting bolt on (unit-A) into the hole on the side-edge of

(unit-B). Insert the Connector Housing (Phillips cross head out) into the hole of (unit-B). *Note: The connector housing has an opening in the threads that must align with the hole in the side-edge of (unit-B) so that the connecting bolt will go in completely. If the connecting bolt does not go completely in, use the screwdriver to rotate the connector housing until units A & B fit snugly together.

Step3: Once (unit-A) and (unit-B) fit tightly together, use the Phillips Head screwdriver to rotate the Connector Housing clockwise until the joint is locked together.

unit-Bunit-B

unit-A	unit-A	unit-A
unit-B	unit-B	unit-B

unit-A