InFocus PRJ-WALLKIT-13 installation instructions Installing Short Throw Projector Arm to Bracket

Installation Instructions							PRJ-WALLKIT-13
	2	x 1			(A)	(B)	Wall plate hook
						2
			3	x 4			(G)
						Projector arm slots
						Figure 11
				3.	Fasten short throw arm (A) to wall plate (B) using two
					1/4-20 x 3/4" button head cap screws (HD). (See Figure 12)
		1	x 2			3	(HD) x 2
		Figure 9
Installing Short Throw Projector Arm to Bracket
1.	Attach arm adjust plate (C) to wall plate ensuring that adjust
	plate tabs fit into notches on wall plate. Insert and slightly
	tighten one 1/4-20 x 1-1/4" button head cap screw (HE). (See
	Figure 10)
				(G)
	(C)
						Figure 12
		1	(HE) x 1

Figure 10

2.Lift short throw projector arm (A) up to wall plate (B) and place projector arm slots over wall plate hooks. (See Figure 11)

Visit the InFocus support site at www.infocus.com/support 9