LG Electronics 55WV70MS, 55WV70BS owner manual Browsing files, Photo List

Page 27

ENTERTAINMENT 27

yyBe sure to back up important files since data stored in a USB memory device may be damaged. We will not be responsible for any data loss.

yyIf the USB HDD does not have an external power source, the USB device may not be detected. So be sure to connect the external power source.

-Please use a power adaptor for an external power source. We do not guarantee an USB

cable for an external power source.

yyIf your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use up to 4 partitions or USB memory devices.

yyIf a USB memory device is connected to a USB multi-card reader, its volume data may not be detected.

yyIf the USB memory device does not work properly, disconnect and reconnect it.

yyHow fast a USB memory device is detected differs from device to device.

yyIf the USB is connected in Standby Mode, specific hard disk will automatically be loaded when the display is turned on.

yyThe recommended capacity is 1 TB or less for a USB external hard disk and 32 GB or less for USB memory.

yyAny device with more than the recommended capacity may not work properly.

yyIf a USB external hard disk with a “Energy Saving” function does not work, turn the hard disk off and on again to make it work properly.

yyUSB storage devices below USB 2.0 are supported as well. But they may not work properly in the movie list.

yyMaximum of 999 folders or files can be rec- ognized under one folder.

yyA USB 3.0 storage device may not work.

Browsing files

Access the photo, music, or movie lists and browse files.

1Connect a USB storage device.

2Press MENU to access the main menus.

3Press the Navigation buttons to scroll to My Media and press OK.

4Press the Navigation buttons to choose from Movie List, Photo List, Music List or Contents List and press OK.

Movie List

 

Photo List

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Music List

 

Contents List

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

2

 

 

 

Photo List

 

 

 

 

Page 1/1

 

 

 

 

 

 

 

 

 

 

 

USB External

 

 

Drive1

 

 

 

Page 1/1

4

001

002

003

004

005

006

007

008

009

5

 

 

 

 

 

 

 

 

 

010

011

012

013

014

015

 

 

 

 

 

 

 

 

 

Move

View

P

Page Change

 

To Music List

Change Numbers

 

Mark Mode

Exit

 

 

 

 

 

 

3

 

 

 

 

 

No.

 

 

 

 

Description

 

 

1Moves to upper level folder

2Current page/Total pages

3

Corresponding buttons on the

remote control

 

Current page/ total pages of contents

4under the folder focused on 1

5Contents under the folder focused on 1

Buttom

Description

 

Press the green button to toggle between

Green Photo List -> Music List, Music List ->

button Contents List, Contents List -> Movie

 

List or Movie List -> Photo List.

Yellow

A method to view in 5 large thumbnail or

button

simple list.

Blue

Convert to Mark Mode.

button

 

ENGLISH

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Monitor Signage Contents English Licenses Assembling and Preparing AccessoriesConnection panel See p.54 to p.56 PartsRemove L-brackets before Installation To install in a Portrait LayoutCorrect Method Incorrect Method Storage Method for Panel ProtectionPlease refer to p11 on How to Mount the Set Installing on a wallExternal Equipment Setup How to Mount the Set Tiling DisplaysExample of 2 x 2 tiling Set 4 joined to the rest of the sets 2 x 2 tiling How to Join SetsNumber and Alphabet buttons Remote ControlVolume Up / Down A Button Toggles between numerical and alphabeticalNavigation buttons Scrolls through menus or One step in user interactionFunction You can assign an input label for every input except USB Displaying the device name connected to an input portUsing the Monitor SET Connecting to a PCRGB connection Problem might occur DVI connectionHdmi connection IR Receiver connection DP connectionAdjusting the screen Selecting an image modeCustomizing image options Adjusting the sound Selecting an sound modeCustomizing PC display options Using additional options Adjusting aspect ratioCustomizing sound options Picture, the image may become distorted Aspect ratio is not adjusted fromProportion. Note When enlarging or reducing Just ScanSelecting an input source Using the input list Router Connecting to a wired network Select IP Auto Setting or IP Manual Setting EntertainmentClose Return to the previous menu Tips for Network settingNetwork Status Ting the networkConnecting USB storage devices Age the files and this may be not covered by the warrantyTips for using USB storage devices Photo List Browsing filesRP,TP,ASF,WMV,FLV Supported file formatViewing movies Tips for using playing video files ProperlyVideo options Language or Repeat Picture Size, Audio Language, SubtitlePhoto List Viewing photosPhoto options Using photo optionsUse the following options while viewing photos Options Number of selected photosTransition Effect Option Sound Mode, Clear Voice II or Balance Listening to musicMusic List Control playback by using the following buttonsViewing the Contents List DivX VOD Guide DivX VOD RegistrationDivX VOD Deregistration Using PIP/PBP Movie ListPhoto List Accessing main menus Customizing SettingsPicture Picture settingsScreen Basic image optionsAdvanced Control Audio Audio settingsTime settings Available time settings are described in the followingTime Option Option settingsSetting Description Tile Mode Setting Description Fan Product/ServiceInfo Portrait mode English Tile ModeSub screen Adjusts the size of the subscreen SizeMain screen PositionPicture ID Off Picture IDNetwork Network settingsCamcorder/Camera Gaming device Making ConnectionsHD Receiver SpeakerNot included YyUse a High Speed Hdmi Cable DVI connectionAVCOMPOSITE,CVBS connection Component connectionUsing the Internet Connecting to the LANConnecting to a USB Using a routerSwitchDaisy Chain Monitors RGB CableDVI Cable Troubleshooting Problem ResolutionNo image is displayed Screen image looks abnormal After-image appears on the productAudio function does not work Operation does not work normally Screen color is abnormalApplicable only for models that support the speakers SpecificationsHDMI/DVI RGB PC supported modeDTV Mode HDMI/DVI/Display PortPC supported modeIR Codes YyAll models do not support the HDMI/USB functionCode Hexa Function Communication Parameter Connecting the cableRS-232C Configurations Controlling the Multiple ProductCommand reference list Command DataHexadecimal Temperature Value Acknowledgement Command2 Set ID OK/NGDatax orTransmission / Receiving protocol TransmissionAspect Ratio Command k c To adjust the screen format Power Command k aEnergy Saving Command j q Picture Mode Command d x To select the picture modeBrightness Command k h Tint Command k j Video Timing only Sharpness Command k k Video Timing onlyColor Command k i Video Timing only Position Command f q Sound Mode Command d y To select the sound mode Size Command f s To set the Horizontal sizeAuto Configuration Command j u Balance Command k t To adjust balanceSpeaker Command d Time 1Year/ Month/ Day Command f a Bass Command k s Volume Control Command k fPower On Delay Command f h Sleep Time Command f f To set sleep timeLanguage Command f Automatic Standby Command m n ISM mode Command j pAuto Off Command f g DPM Select Command f jTile Mode Check Command d z To check Tile Mode status Fail Over Input Select Command m j To select fail over modeReset Command f k Tile Mode Command d dTile H Position Command d e Tile V Size Command d h Tile V Position Command d fTile H Size Command d g FAN Control Comman d o OSD Select Command k l FAN Fault Check Command d w To set Fan control on/offTemperature Value Command d n Key Command m cEnglish Model
Top Page Image Contents