LG Electronics 55WV70BS, 55WV70MS owner manual Basic image options, Screen

Page 42

ENGLISH

42CUSTOMIZING SETTINGS

Setting

 

Description

SCREEN

Customizes the PC display options in RGB mode.

(In RGB

 

 

Option

 

Mode Only)

 

Resolution

Selects a proper resolution. See “Customizing PC display options”.

 

 

 

 

 

Auto Configure

Sets to adjust the screen position, clock, and phase automatically.

 

 

The displayed image may be unstable for a few seconds while the configuration is

 

 

in progress.

 

Position/Size/

Adjusts the options when the picture is not clear, especially when characters are

 

Phase

shaky, after the auto configuration.

 

 

 

 

Reset

Restores the options to the default setting.

 

 

 

Basic image options

Setting

Description

Backlight

Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the

 

brightness level, the screen becomes darker and the power consumption will be reduced

 

without any video signal loss.

Contrast

Increases or decreases the gradient of the video signal. You may use Contrast when the

 

bright part of the picture is saturated.

Brightness

Adjusts the base level of the signal in the picture. You may use Brightness when the dark part

 

of the picture is saturated.

Sharpness

Adjusts the level of crispness in the edges between the light and dark areas of the picture.

 

The lower the level, the softer the image.

Color

Adjusts intensity of all colors.

Tint

Adjusts the balance between red and green levels.

Color Temp .

Set to warm to enhance hotter Colors such as red, or set to cool to make picture bluish.

Advanced Control

Customizes the advanced options. Refer to the Advanced image options. (See p.43).

Picture Reset

Restores the options to the default setting.

NOTE

yyIf the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema, Sport or Game the subsequent menus will be automatically set.

yyYou cannot adjust color and tint in the RGB-PC / HDMI-PC mode.

yyWhen using the Smart Energy Saving function, the screen may look saturated in the white area of a still image.

yyIf Energy Saving is set to Minimum, Medium, or Maximum, the Smart Energy Saving function is disabled.

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Monitor Signage Contents English Licenses Accessories Assembling and PreparingParts Connection panel See p.54 to p.56To install in a Portrait Layout Remove L-brackets before InstallationStorage Method for Panel Protection Correct Method Incorrect MethodInstalling on a wall Please refer to p11 on How to Mount the SetExternal Equipment Setup How to Mount the Set Tiling DisplaysExample of 2 x 2 tiling How to Join Sets Set 4 joined to the rest of the sets 2 x 2 tilingA Button Toggles between numerical and alphabetical Remote ControlVolume Up / Down Number and Alphabet buttonsNavigation buttons Scrolls through menus or One step in user interactionFunction Displaying the device name connected to an input port You can assign an input label for every input except USBUsing the Monitor SET Connecting to a PCRGB connection Problem might occur DVI connectionHdmi connection DP connection IR Receiver connectionAdjusting the screen Selecting an image modeCustomizing image options Adjusting the sound Selecting an sound modeCustomizing PC display options Using additional options Adjusting aspect ratioCustomizing sound options Just Scan Aspect ratio is not adjusted fromProportion. Note When enlarging or reducing Picture, the image may become distortedUsing the input list Selecting an input sourceEntertainment Connecting to a wired networkSelect IP Auto Setting or IP Manual Setting RouterTing the network Tips for Network settingNetwork Status Close Return to the previous menuConnecting USB storage devices Age the files and this may be not covered by the warrantyTips for using USB storage devices Browsing files Photo ListSupported file format RP,TP,ASF,WMV,FLVViewing movies Tips for using playing video files ProperlyVideo options Picture Size, Audio Language, Subtitle Language or RepeatViewing photos Photo ListOptions Number of selected photos Using photo optionsUse the following options while viewing photos Photo optionsTransition Effect Option Listening to music Sound Mode, Clear Voice II or BalanceControl playback by using the following buttons Music ListViewing the Contents List DivX VOD Guide DivX VOD RegistrationDivX VOD Deregistration Using PIP/PBP Movie ListPhoto List Customizing Settings Accessing main menusPicture settings PictureBasic image options ScreenAdvanced Control Audio settings AudioTime settings Available time settings are described in the followingTime Option settings OptionSetting Description Tile Mode Setting Description Fan Product/ServiceInfo Portrait mode Tile Mode EnglishPosition Adjusts the size of the subscreen SizeMain screen Sub screenPicture ID Picture ID OffNetwork settings NetworkSpeaker Making ConnectionsHD Receiver Camcorder/Camera Gaming deviceDVI connection Not included YyUse a High Speed Hdmi CableComponent connection AVCOMPOSITE,CVBS connectionUsing a routerSwitch Connecting to the LANConnecting to a USB Using the InternetDaisy Chain Monitors RGB CableDVI Cable Troubleshooting Problem ResolutionNo image is displayed Screen image looks abnormal After-image appears on the productAudio function does not work Screen color is abnormal Operation does not work normallySpecifications Applicable only for models that support the speakersHDMI/DVI/Display PortPC supported mode RGB PC supported modeDTV Mode HDMI/DVIIR Codes YyAll models do not support the HDMI/USB functionCode Hexa Function Controlling the Multiple Product Connecting the cableRS-232C Configurations Communication ParameterCommand reference list Command DataHexadecimal Temperature Value Transmission Command2 Set ID OK/NGDatax orTransmission / Receiving protocol AcknowledgementPicture Mode Command d x To select the picture mode Power Command k aEnergy Saving Command j q Aspect Ratio Command k c To adjust the screen formatBrightness Command k h Tint Command k j Video Timing only Sharpness Command k k Video Timing onlyColor Command k i Video Timing only Position Command f q Balance Command k t To adjust balance Size Command f s To set the Horizontal sizeAuto Configuration Command j u Sound Mode Command d y To select the sound modeBass Command k s Volume Control Command k f Speaker Command d Time 1Year/ Month/ Day Command f aSleep Time Command f f To set sleep time Power On Delay Command f hDPM Select Command f j Automatic Standby Command m n ISM mode Command j pAuto Off Command f g Language Command fTile Mode Command d d Fail Over Input Select Command m j To select fail over modeReset Command f k Tile Mode Check Command d z To check Tile Mode statusTile H Position Command d e Tile V Size Command d h Tile V Position Command d fTile H Size Command d g FAN Control Comman d o Key Command m c FAN Fault Check Command d w To set Fan control on/offTemperature Value Command d n OSD Select Command k lEnglish Model

55WV70MS, 55WV70BS specifications

LG Electronics has established itself as a leader in the display technology market, and the 55WV70BS and 55WV70MS models exemplify this commitment to innovation and quality. These high-performance displays are designed primarily for commercial use, making them ideal for a variety of applications such as retail, transportation, and corporate environments.

One of the standout features of the 55WV70BS and 55WV70MS is their stunning 55-inch Ultra HD display. With a resolution of 3840 x 2160 pixels, these models deliver crystal-clear images that bring content to life. The IPS (In-Plane Switching) technology ensures wide viewing angles, which is crucial for environments where viewers may be positioned at various angles relative to the screen. The vivid colors and sharp detail enhance the visual experience, making them perfect for showcasing advertisements, presentations, or informational content.

Both models boast a slim and stylish design, allowing them to blend seamlessly into any commercial setting. Their lightweight construction simplifies installation, whether mounted on a wall or placed atop a stand. Additionally, the integrated built-in speakers enhance audio capabilities, eliminating the need for external sound systems in many cases.

The 55WV70BS and 55WV70MS also come equipped with advanced connectivity options. They feature HDMI, DisplayPort, and USB ports, making it easy to connect to a variety of devices such as computers, laptops, and media players. Furthermore, the models support wireless connectivity, allowing for seamless content sharing and management from compatible devices.

Another significant aspect of these displays is their reliability. Engineered for continuous operation, they are capable of running 24/7 without compromising performance. This makes them suitable for environments that require constant visibility, such as digital signage in public spaces.

Both the 55WV70BS and 55WV70MS feature LG’s webOS platform, which streamlines the process of creating and managing content. Users can easily schedule content, display multiple sources, and control settings through a user-friendly interface. This versatility ensures that businesses can adapt quickly to changing needs without extensive training.

In conclusion, the LG Electronics 55WV70BS and 55WV70MS models are exceptional displays that combine cutting-edge technology with practical features, tailored for commercial applications. Their impressive visuals, robust connectivity, and ease of use make them ideal choices for businesses looking to enhance their visual communication capabilities.
Top Page Image Contents