LG Electronics 55WV70BS, 55WV70MS Fail Over Input Select Command m j To select fail over mode

Page 74

74CONTROLLING THE MULTIPLE PRODUCT

ENGLISH

36.Fail Over Input Select (Command: m j) To select fail over mode.

*Only available in Fail Over manual mode.

Transmission

[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data Data1 to 4(Priority 1 to 3)

60:RGB

70:DVI-D*

90:HDMI**

C0: Display Port***

* Use 0x70 as data for DVI-D input, regardless DVI- D(PC) or DVI-D(DTV).

**Use 0x90 as data for HDMI input, regardless HDMI-DTV or HDMI-PC

***Use 0xC0 as data for Display Port input, regardless Display Port(DTV) or Display Port(PC)

Acknowledgement

[j][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]

Data1 to 3(Priority 1 to 3) 60: RGB

70:DVI-D****

90:HDMI*****

C0: Display Port******

****Returns 0x70 as Data for DVI-D port, regardless DVI-D(PC) or DVI-D(DTV).

*****Returns 0x90 as Data for HDMI port, regardless HDMI-DTV or HDMI-PC.

****** Returns 0xC0 as Data for Display Port, regardless Display Port(DTV) or Display Port(PC).

37.Reset (Command: f k)

To execute the Picture, Screen, Audio and Factory reset function.

Transmission

[f][k][ ][Set ID][ ][Data][Cr]

Data 00: Picture Reset

01:Screen Reset

02:Audio Reset

03:Factory Reset

Acknowledgement

[k][ ][Set ID][ ][OK/NG][Data][x]

38.Tile Mode (Command: d d)

To select a Tile Mode Off/ On and Tile Row/ Column size.

Transmission

[d][d][ ][Set ID][ ][Data][Cr]

Data 00 to FF: 1st byte - Tile Row value 2nd byte - Tile Column value

*00, 01, 10, 11 means Tile Mode Off. Acknowledgement

[d][ ][Set ID][ ][OK/NG][Data][x]

39.Tile Mode Check (Command: d z) To check Tile Mode status.

Transmission

[d][z][ ][Set ID][ ][Data][Cr]

Data FF: Check Tile Mode status Acknowledgement

[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]

Data1

00: Tile Mode Off

 

01: Tile Mode On

Data2

00 to 0F: Tile Row Value

Data3

00 to 0F: Tile Col Value

40.Tile ID (Command: d i) To set Tile ID.

Transmission

[d][i][ ][Set ID][ ][Data][Cr]

Data 01 to E1: Tile ID 01 to 225**

FF:Read Tile ID

**Data could not be set over (Tile Row) x (Tile Column)

Acknowledgement

[i][ ][Set ID][ ][OK/NG][Data][x]

Page 73 Page 75
Image 74
Page 73 Page 75
Contents Monitor Signage Contents English Licenses Accessories Assembling and PreparingParts Connection panel See p.54 to p.56To install in a Portrait Layout Remove L-brackets before InstallationStorage Method for Panel Protection Correct Method Incorrect MethodInstalling on a wall Please refer to p11 on How to Mount the SetExternal Equipment Setup Example of 2 x 2 tiling How to Mount the SetTiling Displays How to Join Sets Set 4 joined to the rest of the sets 2 x 2 tilingA Button Toggles between numerical and alphabetical Remote ControlVolume Up / Down Number and Alphabet buttonsFunction Navigation buttons Scrolls through menus orOne step in user interaction Displaying the device name connected to an input port You can assign an input label for every input except USBRGB connection Using the Monitor SETConnecting to a PC Hdmi connection Problem might occurDVI connection DP connection IR Receiver connectionCustomizing image options Adjusting the screenSelecting an image mode Customizing PC display options Adjusting the soundSelecting an sound mode Customizing sound options Using additional optionsAdjusting aspect ratio Just Scan Aspect ratio is not adjusted fromProportion. Note When enlarging or reducing Picture, the image may become distortedUsing the input list Selecting an input sourceEntertainment Connecting to a wired networkSelect IP Auto Setting or IP Manual Setting RouterTing the network Tips for Network settingNetwork Status Close Return to the previous menuTips for using USB storage devices Connecting USB storage devicesAge the files and this may be not covered by the warranty Browsing files Photo ListSupported file format RP,TP,ASF,WMV,FLVViewing movies Video options Tips for using playing video filesProperly Picture Size, Audio Language, Subtitle Language or RepeatViewing photos Photo ListOptions Number of selected photos Using photo optionsUse the following options while viewing photos Photo optionsTransition Effect Option Listening to music Sound Mode, Clear Voice II or BalanceControl playback by using the following buttons Music ListViewing the Contents List DivX VOD Deregistration DivX VOD GuideDivX VOD Registration Photo List Using PIP/PBPMovie List Customizing Settings Accessing main menusPicture settings PictureBasic image options ScreenAdvanced Control Audio settings AudioTime Time settingsAvailable time settings are described in the following Option settings OptionSetting Description Tile Mode Info Portrait mode Setting Description FanProduct/Service Tile Mode EnglishPosition Adjusts the size of the subscreen SizeMain screen Sub screenPicture ID Picture ID OffNetwork settings NetworkSpeaker Making ConnectionsHD Receiver Camcorder/Camera Gaming deviceDVI connection Not included YyUse a High Speed Hdmi CableComponent connection AVCOMPOSITE,CVBS connectionUsing a routerSwitch Connecting to the LANConnecting to a USB Using the InternetDVI Cable Daisy Chain MonitorsRGB Cable No image is displayed TroubleshootingProblem Resolution Audio function does not work Screen image looks abnormalAfter-image appears on the product Screen color is abnormal Operation does not work normallySpecifications Applicable only for models that support the speakersHDMI/DVI/Display PortPC supported mode RGB PC supported modeDTV Mode HDMI/DVICode Hexa Function IR CodesYyAll models do not support the HDMI/USB function Controlling the Multiple Product Connecting the cableRS-232C Configurations Communication ParameterHexadecimal Command reference listCommand Data Temperature Value Transmission Command2 Set ID OK/NGDatax orTransmission / Receiving protocol AcknowledgementPicture Mode Command d x To select the picture mode Power Command k aEnergy Saving Command j q Aspect Ratio Command k c To adjust the screen formatColor Command k i Video Timing only Position Command f q Brightness Command k h Tint Command k j Video Timing onlySharpness Command k k Video Timing only Balance Command k t To adjust balance Size Command f s To set the Horizontal sizeAuto Configuration Command j u Sound Mode Command d y To select the sound modeBass Command k s Volume Control Command k f Speaker Command d Time 1Year/ Month/ Day Command f aSleep Time Command f f To set sleep time Power On Delay Command f hDPM Select Command f j Automatic Standby Command m n ISM mode Command j pAuto Off Command f g Language Command fTile Mode Command d d Fail Over Input Select Command m j To select fail over modeReset Command f k Tile Mode Check Command d z To check Tile Mode statusTile H Size Command d g FAN Control Comman d o Tile H Position Command d e Tile V Size Command d hTile V Position Command d f Key Command m c FAN Fault Check Command d w To set Fan control on/offTemperature Value Command d n OSD Select Command k lEnglish Model

55WV70MS, 55WV70BS specifications

LG Electronics has established itself as a leader in the display technology market, and the 55WV70BS and 55WV70MS models exemplify this commitment to innovation and quality. These high-performance displays are designed primarily for commercial use, making them ideal for a variety of applications such as retail, transportation, and corporate environments.

One of the standout features of the 55WV70BS and 55WV70MS is their stunning 55-inch Ultra HD display. With a resolution of 3840 x 2160 pixels, these models deliver crystal-clear images that bring content to life. The IPS (In-Plane Switching) technology ensures wide viewing angles, which is crucial for environments where viewers may be positioned at various angles relative to the screen. The vivid colors and sharp detail enhance the visual experience, making them perfect for showcasing advertisements, presentations, or informational content.

Both models boast a slim and stylish design, allowing them to blend seamlessly into any commercial setting. Their lightweight construction simplifies installation, whether mounted on a wall or placed atop a stand. Additionally, the integrated built-in speakers enhance audio capabilities, eliminating the need for external sound systems in many cases.

The 55WV70BS and 55WV70MS also come equipped with advanced connectivity options. They feature HDMI, DisplayPort, and USB ports, making it easy to connect to a variety of devices such as computers, laptops, and media players. Furthermore, the models support wireless connectivity, allowing for seamless content sharing and management from compatible devices.

Another significant aspect of these displays is their reliability. Engineered for continuous operation, they are capable of running 24/7 without compromising performance. This makes them suitable for environments that require constant visibility, such as digital signage in public spaces.

Both the 55WV70BS and 55WV70MS feature LG’s webOS platform, which streamlines the process of creating and managing content. Users can easily schedule content, display multiple sources, and control settings through a user-friendly interface. This versatility ensures that businesses can adapt quickly to changing needs without extensive training.

In conclusion, the LG Electronics 55WV70BS and 55WV70MS models are exceptional displays that combine cutting-edge technology with practical features, tailored for commercial applications. Their impressive visuals, robust connectivity, and ease of use make them ideal choices for businesses looking to enhance their visual communication capabilities.
Top Page Image Contents