Additional LiteMount Products

CEILING MOUNT INSTALLATION GUIDE

The LP 1000 Series LiteMountTM makes it easy to hang your projector from the ceiling for fixed installation use in meeting, auditorium and training room settings.

You must determine the suitability of this prod- uct for your intended use and assume all risk and liability in connection therewith. In Focus recommends that a professional contractor or other facilities professional assist you in mount- ing this device. Be sure to take precautions to meet all local building codes.

In Focus offers two additional LiteMount prod- ucts that may make your ceiling mount installa- tion easier.

•The LiteMount False Ceiling Plate

(SP-LTMT-PLT) is designed for suspended ceil- ings with acoustic tiles. It mounts in your ceil- ing in place of a ceiling tile. It is pre-drilled with holes to install the LiteMount brackets.

•The LiteMount Pipe Tubing Extension (SP- LTMT-EXT) allows you to install the projector in a room with a high ceiling. With the exten- sion, you can place the projector from 12” (30.5) to 46” (117 cm) from the ceiling.

Contact your In Focus dealer to order these prod- ucts.

Placing the Projector

Refer to the LP 1000 User’s Guide for image dis- tance, size, and angles of projection to determine where to install the ceiling mount to meet your projection needs.

WARNING: This installa- tion must be performed in compliance with your local building code require- ments. Local require- ments take precedence over any instructions given in this guide.