A t t a c h t h e M o u n t i n g P l a t e t o t h e P r o j e c t o r
CAUTION: Use only the hardware that is provided with the LP 1000 Series Ceiling Mount. Using different hardware may damage your projector.
Attach the Mounting Plate to the Projector
1Set the projector on a table with the bottom side up.
2Insert the 3 screws into the 3 quick release sleeves (Figure 3).
3Attach the screws and sleeves to the holes in the projector as shown in Figure 3. Be careful not to
4Align the keyholes in the mounting bracket with the screws in the projector. Slide the mounting bracket until the quick release sleeves are at the top of the keyhole slot.
5Attach the 10/32 knurled knob to the projec- tor in the location shown in Figure 3.
quick release screws
quick release screw
knurled knob goes here
FIGURE 3
Attach the mounting plate to the projector
6