RBH Sound TK Series operation manual Specifications, Troubleshooting

Specifications

Model	TK-5CT	TK-515C				TK-5C
Frequency	45Hz – 20Hz	60Hz – 20Hz				60Hz – 20Hz
Response:
Sensitivity:	87dB	89dB				86dB
Power	150 Watts	120 Watts				100 Watts
Handling:
Woofer:	8” Kraft Pulp Woofer	Dual 5¼” Fiberglass				5¼” Fiberglass
	Dual 5¼” Fiberglass	Mid-Range Woofers				Mid-Range Woofer
	Mid-Range Woofers
Tweeter:	1” Fabric Dome Tweeter	1” Fabric Dome				1” Fabric Dome
		Tweeter				Tweeter
Impedance:	8 Ohms	8 Ohms				8 Ohms
Crossover	120Hz / 3000 Hz	3000 Hz				3000 Hz
Frequencies:
Dimensions:	Height: 42.5”	Height: 7			”	Height: 12¾”
			¼
			1	8
	Width: 11”	Width: 20¾”				Width: 7			”
							¼
							1	8
	Depth: 13¼”	Depth: 8½”				Depth: 8½”
Finish:	Black or Rosewood with	Black or Rosewood				Black or Rosewood
	gloss black top/side	with gloss black				with gloss black
	accents	top/side accents				top/side accents
Weight:	40	17				11

Troubleshooting

Situation:	Probable Cause:	Solution:
No sound from	Speaker wire not connected	Make sure wire is connected
speakers		at both the speaker and the
		amplifier observing proper
		polarity
	Speaker selector on amplifier	Activate proper selector on
	is not on	amplifier
No sound from	Balance control on receiver	Place balance control in the
one speaker	or pre-amp is not centered	center
	Speaker wire not securely	Check all connections at
	connected	amplifier and speakers
Very little bass	Speakers are wired out of	Check entire system for
and/or imaging	phase	proper polarity and make
		adjustments as necessary