Philips AC4108 Guarantee and service, Environment, Troubleshooting, Problem, Solution, English

English 11

2Slide the ESP particle filter into the appliance (Fig. 6).

3Slide the pre-filter into the appliance. (Fig. 20)

4To reattach the front panel, insert the bottom edge first (1) and then press the top part home (2) (Fig. 7).

Guarantee and service

If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Consumer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country, go to your local Philips dealer.

Environment

-Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment (Fig. 21).

Troubleshooting

This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact the Consumer Care Centre in your country.

Problem	Solution
The selected function/	The appliance may be in standby mode or may be switched off.
time mode doesn’t
work.

The appliance doesn’t work.

The clean air doesn’t come smoothly out of the air outlet

There may be a connection problem. Check if the plug is inserted in the wall socket properly.

The appliance may not be switched on. AC4064/AC4054: press the

function selection button. AC4062/AC4052: press the on/off button.

The ESP particle filter or the front panel may not be placed properly. Reinsert the filters and reattach the front panel.

The zeolite gas filter is not placed yet. Insert the filter and reattach the front panel.

If you have performed the above checks and the appliance still does not work, it may be malfunctioning. Unplug the appliance and take it to your Philips dealer or an authorised Philips service centre.

The pre-filter may be clogged. Clean the pre-filter (see chapter ‘Cleaning and maintenance’).

Perhaps you forgot to remove the plastic wrapper of a new filter. Remove the plastic wrapper before you switch on the appliance again.

The air inlet or outlet may be blocked by external objects. Remove the object that blocks the air inlet or outlet.