Main Control Surface

Operating Manual - neWR-5 Remote Control for NE Products

The main control surface is where the neWR-5 is named, its target NE device gets selected, any zone deﬁnition occurs, and where the function buttons are programmed, The neWR-5 comes with all function buttons set to “Off”. Unlike the WR-5, changes must be saved to the neWR-5 before becoming effective.

Not all of the button functions listed below are available on all NE products, for instance an ampliﬁer will not have “matrix mixer” capability unless it has DSP installed, and some products do not have logic outputs. Protea NE software is able to determine which functions are available for neWR-5 control.

1)Off - No function assigned and the button’s LED remains unlit

2)Preset Recall - A single preset number is assigned to a button. When the button is pressed, the recalled preset number and the letters “PC” (Preset Change) are alternately ﬂashed on the WR-5 for ﬁve seconds, also locking out any other WR-5 action for that time.

3)Preset Scroll Mode - A range of presets can be assigned to a function button which when selected, enables the up/down buttons to scroll through the available presets. Upon release of the up/ down button, the currently displayed preset will load. The function button will glow amber for the duration of the preset scroll operation.

4)Gain Control - Since there are many possible gain adjustment points within a given NE au- dio processing device, the neWR-5 displayed gain level is only a relative value. In other words, gain could be changed elsewhere in the target unit, independent from neWR-5 control. The neWR-5 can adjust gain from 0 to 99, and an upper and lower number limit can be set in the function range sec- tion to limit the maximum and minimum reach of that control. To control the gain within the target device’s input or output signal path, the neWR-5 remote gain function must ﬁrst be inserted into a block in the unit’s DSP controls window.

Gain Control over individual channel(s) - When a gain control button is assigned to control one or more individual channels, pressing that button will cause it to light amber, during which time the up/down buttons determine gain for the selected channels. If the up/down buttons remain idle for ﬁve seconds, the gain button becomes inactive until being pressed again.

Gain Control over zone - If a zone output is active for that neWR-5, meaning one or more output checkboxes are selected within the neWR-5 Zone Setup mode, the output gain for that zone will be shown as the default numerical display, during which time the up/down buttons stay ac- tive for that zone’s overall gain control. If a button is assigned for individual input channel(s) gain control in addition to the neWR-5 being deﬁned for output zone control, that button will turn amber when pressed, and both the neWR-5 up/down buttons and display will reﬂect the input channel(s) gain, reverting back to output zone gain after ﬁve seconds of inactivity. If there is no zone output assigned for the neWR-5, the display shows “--” as the default.

5)Channel Engage/Mute - A button can be conﬁgured to mute one or more inputs or outputs, or any combination of the two. The button is green when engaged and red when the selected chan- nels are muted.

NEWR-5 specifications

The Ashly NEWR-5 is a state-of-the-art networked audio solution designed for modern audio systems requiring high performance and flexibility. This device is a part of Ashly's extensive lineup of audio processing products, focusing on providing impressive sound quality, reliability, and ease of use.

One of the main features of the NEWR-5 is its advanced network connectivity. It supports both Dante and AES67 protocols, making it highly compatible with a range of digital audio systems. This allows users to integrate the NEWR-5 effortlessly into existing networks, ensuring seamless communication between devices. The device can handle multiple audio channels simultaneously while maintaining low latency, which is crucial for real-time audio applications.

Another key feature of the NEWR-5 is its powerful DSP capabilities. Equipped with a sophisticated digital signal processor, the NEWR-5 enables extensive audio manipulation and processing. Users can take advantage of varied built-in presets, including EQ, dynamics processing, filters, and routing controls. This flexibility allows for tailored sound processing suitable for diverse environments, be it live sound reinforcement, installations, or broadcast settings.

The NEWR-5's user interface is designed with simplicity in mind. An intuitive web-based application provides users with easy access to its functions from any device with an internet connection. This interface allows for real-time monitoring and adjustments, ensuring optimal performance in any situation. The device also includes built-in monitoring features to check levels, status, and network connections effortlessly.

In terms of build quality, the NEWR-5 is constructed to withstand the rigors of professional use. Its compact and durable chassis allows for easy installation in various settings, such as racks or setups where space is a premium. The NEWR-5's low power consumption and efficient cooling design further enhance its appeal as a reliable long-term audio component.

Overall, the Ashly NEWR-5 is engineered for those who demand high-quality audio performance coupled with advanced networking capabilities. Its remarkable features, coupled with the ease of use and robust design, make it an ideal choice for audio professionals seeking a reliable and versatile audio processing solution. Whether for live events, installations, or studio environments, the NEWR-5 stands out as a leading choice in the competitive audio gear market.