Fujitsu 16LX manual Odvk,W

)ODVK,W￿	&KDSWHU
	￿

If the CPU mounted on the CPU board has a FLASH memory, the )2DevKit16/9$(6+3559,(FLASH:2*52)$70Programming+0(,1'*7(9.2,2/7￿￿Tool can be used to program it.

DevKit16 FLASH Programming Tool provides standard operations (check/program/verify) for CPU Internal FLASH memory, Mainboard FLASH or both.

With the standalone CPU board, it is possible to program only the internal FLASH. The check-box "External bus free ?" should be set to "no" (this tells the SW not to use the FPGA UART). The Flashtool will guide you to set the proper mode on the CPU board DIP switches. The communication will run on 9600Bd only, and only CPU FLASH can be programmed.

For further information, please see the DevKit16 FLASH Programming Tool online Help.