Driver Installation Guide
Windows® For non-Network Users
Follow the instructions in this guide for your interface cable.
Some illustrations are based on the
Steps 1 to 5 Follow these steps in the Quick Setup Guide first.
For USB Interface Cable Users Only
Step 6 Install the Driver & Connect the Printer to Your PC
Note: When the "Add New Hardware Wizard" appears on your PC, click the Cancel button.
Note: Make sure the USB interface cable is NOT |
|
connected to the printer, and then begin installing the |
|
driver. If you have already connected the cable, |
|
remove it. | 1 Insert the |
| The opening screen will appear automatically. |
| Follow the instructions on the screen. |
2 Click the Install Software | 3 Click "Printer Driver." | 4 Click the Next button. | 5 Select "Standard Installation," |
icon on the Menu screen. |
| Follow the instructions on | and then click the Next button. |
|
| the screen. |
|
For Parallel Interface Cable Users Only
Step 6 Connect the Printer to Your PC & Install the Driver
1 Turn off the printer power button. | 2 Connect the parallel interface cable to your PC, | 3 Turn on the printer | Note: If the "Add New Hardware Wizard" |
| and then connect it to your printer. | power button. | appears on your PC, click the Cancel |
|
|
| button. |
4 Insert the | 5 Click the Install Software icon on | 6 Click "Printer Driver." | 7 Click the Next button. |
The opening screen will appear automatically. | the Menu screen. |
|
|
Follow the instructions on the screen. |
|
|
|
8 Select "Standard Installation," and | 9 Select "Local Printer," and | 10 Select the port where your printer is | 11 Click the Finish button. |
then click the Next button. | then click the Next button. | connected, and then click the Next | The setup is now complete. |
|
| button. |
|
6 Select "Local Printer with | 7 When this screen appears, make sure the printer power button is on. | 8 Click the Finish button. |
USB cable," and then click | Connect the USB interface cable to your PC, and then connect it to the printer. | The setup is now |
the Next button. | Click the Next button. | complete. *1 |
*1 Please follow the steps below when the printer is not set as the default printer.
Note: Setting Your Printer as the Default Printer (For Windows® 2000/XP users only)
1 Click Start, Settings and Printers. | 2 Select the Brother | 3 From the File menu, select |
Control Panel
K C M Y
NETWORK READY
Power Ready Data
Alarm
Go Job
Cancel
Secure
Reprint Back Set
For more information, see "CONTROL PANEL OPERATION" in Chapter 4 of the
LEDs
Power (Green) | Lights when the printer power is on. |
Ready (Green) | Lights when the printer is ready to print or is printing. |
Data (Orange) | Lights when data remains in the printer buffer. |
| Blinks when the printer is receiving or processing the data. |
|
|
Alarm (Red) | Lights when the printer has a problem (Operator Call, Error, Service Error) and suspends |
| printing. |
|
|
Buttons
Go | Exit from the control panel menu, Reprint settings or clear error messages. | ||||
|
|
|
|
| Pause / Continue printing. |
|
|
|
|
|
|
Job Cancel | Stop and cancel the printer operation in progress. | ||||
|
|
|
|
|
|
Secure Print | Print secure documents. | ||||
|
|
|
|
|
|
Reprint | Select the Reprint menu. | ||||
|
|
|
|
|
|
|
|
|
|
| Move forward through menus. |
|
|
|
|
| |
|
|
|
|
|
|
Menu |
|
|
|
| Move backward through menus. |
|
|
|
| ||
Set | Select the control panel menu. | ||||
|
|
|
|
| Set the selected menus and settings. |
| Back | Go back one level in the menu structure. | |||
Language Setting (Default is English)
1.Select the SETUP mode by pressing the + button, and then press the Set button.
2.Check that the LANGUAGE message appears, and then press the Set button.
3.Choose your language by pressing the + or - button, and then press the Set button. An asterisk mark (*) appears at the end of the display.
(You can return to the READY status by pressing the Go button.)
Set as Default printer. |
©2001 Brother Industries, Ltd.
Windows and Windows NT are registered trademarks of Microsoft Corporation in the U.S. and other countries. HP, HP/UX, JetDirect and JetAdmin are trademarks of
All other brand and product names mentioned in this Quick Setup Guide and User's Guide are registered trademarks or trademarks of their respective companies.
User's Guide on the supplied | Note 1. A |
| |
| You need to set the time before you can use the log management and Reprint functions. |
| 2. Please enhance the RAMDISK size when you want to use the Reprint functions without the optional HDD or |
| CompactFlash. |
| See RAM expansion. In the |