Kramer Electronics manual Part II The SV-552 SummitView Processor/Switcher

Page 10

Defining the SV-552 Processor/Switcher

PART II The SV-552 SummitView™ Processor/Switcher

PART II defines the SV-552 SummitView™ Processor/Switcher

4 Defining the SV-552 Processor/Switcher

The Kramer SV-552 SummitView™ Processor/Switcher is designed specifically for the SummitView™ system and is an integral part of it. The SV-552fits inside the SV-1housing (optional) and can only be controlled via the default RC-63DLor via one of the other (optional) Kramer K-Net™ compatible controllers. The SV-552features Twisted Pair video and audio inputs. It also has an IR output for video sources and features a Master controller, as well as a power amplifier and audio line out. The SV-552front panel controls include six input selector buttons, three LEDs and a USB port. It receives input signals via the RJ-45 connectors from the SV-301xl, SV-302, SV-306and the SV-307wall plate devices.

The SV-552RJ-45 TP inputs include:

•Two for video

•Three for computers

•One for HDMI

The SV-552projector outputs include:

•VGA output on a 15-pin HD connector

•Composite video on an RCA connector

•HDMI with embedded audio on a DVI-D connector

In addition, the SV-552features:

•Terminal blocks for unbalanced stereo audio speaker output

•Terminal blocks for Monitor and Line audio out

•Terminal blocks for an AUX input (Line or Mic level)

•10V volume control

•Control relays

•RS-232 and RS-485

The SV-552can be controlled by any of the following:

•One of Kramer's remote controllers (for example, RC-63DL) via the proprietary communication K-Netchannel

•Over a network connection via the Ethernet port

•Front panel input selector buttons

•The RC-4IR Remote Controller or similar device

6

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model Contents Part I Your SummitView SystemFigures Tables Introduction Getting StartedPart I Your SummitView System Basic SummitView SV-552 InstallationOverview Shielded Twisted Pair and Unshielded Twisted Pair STP1, BC-DGKat524 or 8-Step SummitView Basic System Quick Installation GuideQuick Installation Guide for the SummitView Basic System Net cabling to the intended RC-63DL locationOverview Part II The SV-552 SummitView Processor/Switcher Defining the SV-552 Processor/SwitcherSV-552 SummitView Processor / Switcher Front and Rear Panels SV-552 SummitView Processor/Switcher Underside Features Feature FunctionSummitView Processor/ Switcher DDC SupportConnecting the SV-552 SummitView Processor/ Switcher Part III Detailed Installation InstructionsConnecting the SV-552 Processor/Switcher Operating the SV-552 Processor/Switcher Remotely Connecting the SV-552Installing the SV-552 in a 19 Rack Optional RC-63DL Room Controller Defining the RC-63DLVersion for the USA Version for Europe Connecting the Room Controller RC-63DL Room Controller Rear Panel FeaturesDefining and Connecting the Wall Plates Defining the Wall Plates U.S SV-301xl Front View SV-301xl Rear View Feature FunctionDefining the SV-301xl U.S Defines the SV-301xl, as an example, in its plastic frame Enclosing a Wall Plate U.S. in its Plastic Frame1SV-302 Front View SV-302 Rear View Feature Function Defining the SV-302 U.SSV-306 Front View SV-306 Rear View Feature Function Defining the SV-306 U.SSV-307 Front View SV-307 Rear View Feature Function Defining the SV-307 U.SDefining the Wall Plates England and Europe1 Defining the SV-301xl England and Europe2Defining the SV-302 England and Europe1 Defining the SV-306 England and Europe1 SV-306 Front ViewConnecting the Wall Plates to the SV-552 Connecting the SV-301xl to the SV-552Connecting the SV-302 Wall Plate to the SV-552 Connecting the SV-306 Wall Plate to the SV-552 Optional Wiring the TP Line In/Line Out Connectors Wiring the Twisted Pair RJ-45 Terminals U.SUTP Pinout U.S Wiring the Terminal Block England and EuropeWire Color Terminal Block Pinout England and EuropeCabling for the SV-306 and SV-307 Grounding the Wall PlateGrounding Screw, Lock Washers and Ring Tongue Terminal Wiring the K-Net Connector Backlit Buttons Part IV Further informationCustomizing the Controllers Buttons and Labels Button Label SheetCable for use with the SV-302 SummitView System CablesRecommended Cables for use with SummitView Systems Cables for use with the SV-552D9M/D9F-3 RS-232 Cable Pinout SummitView Cable TerminationSummitView Cable Termination BCP-KNET-50 Cable Pinout See also Figure BCP-2S-25 CableStickers Affixed to Cables Technical Specifications1 of the SV-552 Processor/Switcher Technical SpecificationsDescription ADA Requirements Overhead and Side Clearance RequirementsADA Requirements 15 SV-552 SummitView Essentials Basic System Check List Page Safety Warning

SV-552 specifications

Kramer Electronics SV-552 is a high-performance video and multimedia switcher that provides a versatile solution for various audio-visual applications. Designed for both professional and commercial uses, the SV-552 is particularly well-suited for environments such as conference rooms, lecture halls, and control centers, where reliable and seamless multimedia presentations are crucial.

One of the main features of the SV-552 is its ability to switch between multiple input sources effortlessly. It supports a variety of input formats, including HDMI, VGA, and composite video, making it a flexible choice for users with different hardware setups. This versatility means that whether you're connecting a laptop, projector, or video playback device, the SV-552 can handle it all.

The switcher's output resolution capabilities are impressive, supporting resolutions up to 4K at 60Hz, ensuring that even high-definition content can be delivered without loss of quality. This feature is essential for users who rely on crystal-clear visuals during presentations.

Another significant technology incorporated into the SV-552 is the use of advanced scaling capabilities. This built-in scaler allows users to adjust the output resolution to match the requirements of their display devices, whether it’s a large screen, digital signage, or a smaller monitor. The result is an optimized viewing experience without any distortion or lag.

In addition to its video switching capabilities, the SV-552 includes integrated audio management features, enabling users to route audio signals along with video. This eliminates the need for separate audio switches, streamlining the overall setup while ensuring synchronized audio and video playback.

The device also boasts robust control options. Users can manage the SV-552 via an intuitive front-panel interface or by using remote control through RS-232 or IP protocols. This flexibility allows for easy integration into existing control systems, enhancing the overall user experience.

Furthermore, the rugged design of the SV-552 ensures durability and reliability, making it a long-lasting investment for any professional audiovisual setup. With advanced features, versatile connectivity, and user-friendly controls, Kramer Electronics SV-552 stands out as an essential tool for anyone looking to deliver high-quality multimedia experiences.
Top Page Image Contents