Kramer Electronics SV-552 manual Technical Specifications, Description

Page 40

Technical Specifications

13 Technical Specifications

Technical specifications of the SV-552 SummitView™ Processor/Switcher are shown in Table 19.

Table 19: Technical Specifications1 of the SV-552 Processor/Switcher

Item

Description

INPUTS:

1 AUX stereo on a 3-PIN terminal block; 1 HDMI, 3 PC (XGA and Y, Pb,

 

Pr), 1 Composite Video on RJ-45 connectors

OUTPUTS:

1 SPKR (speaker) stereo on a 4-PIN terminal block; 1 Projector (XGA) on a

 

15-pin HD computer graphics video connector; 1 composite video on RCA

 

connector; 1 DVI, 3 DDC (bi-directional, inputs/outputs, as required) on RJ-

 

45 connectors

 

 

10V Volume, 2 relays on terminal block connectors (36VAC or DC, 2A, 60VAC

 

maximum on non-inductive load), RS-232, and RS-485 3-PIN terminal blocks;

 

IR OUT 2-PIN terminal block

 

MAX. OUTPUT LEVEL:

VIDEO: CV 2.6Vpp; XGA 2.2Vpp

AUDIO: 7W per channel into 4Ω

 

 

LINEOUT: 5.8Vpp @max volume, tone

 

 

controls zeroed

BANDWIDTH (-3dB):

VIDEO: CV 68MHz; XGA and Y,

AUDIO: 20Hz to 20kHz

 

Pb, Pr 130MHz

 

DIFF. GAIN:

0.35%

 

DIFF. PHASE:

0.01Deg.

 

K-FACTOR:

<0.05%

 

S/N RATIO:

VIDEO: 59dB unweighted,

AUDIO: 55dB @1KHz,

 

66dB @5MHz weighted

LINEOUT: 85dB @1KHz

CONTROLS:

IR, RS-232, RS-485, Ethernet, K-Net

COUPLING:

VIDEO: DC

AUDIO/LINEOUT: Input: AC; Output: DC

AUDIO THD + NOISE:

AUDIO: 1.1% @1KHz, 12.8Vpp, LINEOUT: 0.063% @1KHz 2.4Vpp

AUDIO 2nd HARMONIC:

AUDIO: 0.4% @1KHz, 8Vpp, LINEOUT: 0.02% @1KHZ, 2.4Vpp

AUDIO INPUT SENSITIVITY:

140mVpp

 

AUDIO VOLTAGE GAIN:

97 x 39.7dB

 

OPERATING

0° to +55°C (32° to 131°F)

 

TEMPERATURE:

 

 

STORAGE

–45° to +72°C (–49° to 162°F)

 

TEMPERATURE:

 

 

HUMIDITY:

10% to 90%, RHL non-condensing

 

POWER CONSUMPTION:

12V 4.3A

 

DIMENSIONS:

27.78cm x 7.65cm x 4.36cm (10.94" x 3.01" 1.72") W, D, H

WEIGHT:

0.65kg (1.43lbs) approx.

 

ACCESSORIES:

See Table 17

 

OPTIONS:

Power supply, a pair of detachable rack ears and shelf, RC-4 Infrared

 

Remote Controller, RK-551 (for installing in a 19” rack)

1 Specifications are subject to change without notice

36

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Model Contents Part I Your SummitView SystemFigures Tables Introduction Getting StartedPart I Your SummitView System Basic SummitView SV-552 InstallationOverview Shielded Twisted Pair and Unshielded Twisted Pair 8-Step SummitView Basic System Quick Installation Guide Quick Installation Guide for the SummitView Basic SystemSTP1, BC-DGKat524 or Net cabling to the intended RC-63DL locationOverview Part II The SV-552 SummitView Processor/Switcher Defining the SV-552 Processor/SwitcherSV-552 SummitView Processor / Switcher Front and Rear Panels SV-552 SummitView Processor/Switcher Underside Features Feature FunctionSummitView Processor/ Switcher DDC SupportConnecting the SV-552 SummitView Processor/ Switcher Part III Detailed Installation InstructionsConnecting the SV-552 Processor/Switcher Operating the SV-552 Processor/Switcher Remotely Connecting the SV-552Installing the SV-552 in a 19 Rack Optional RC-63DL Room Controller Defining the RC-63DLVersion for the USA Version for Europe Connecting the Room Controller RC-63DL Room Controller Rear Panel FeaturesDefining and Connecting the Wall Plates Defining the Wall Plates U.S SV-301xl Front View SV-301xl Rear View Feature FunctionDefining the SV-301xl U.S Defines the SV-301xl, as an example, in its plastic frame Enclosing a Wall Plate U.S. in its Plastic Frame1SV-302 Front View SV-302 Rear View Feature Function Defining the SV-302 U.SSV-306 Front View SV-306 Rear View Feature Function Defining the SV-306 U.SSV-307 Front View SV-307 Rear View Feature Function Defining the SV-307 U.SDefining the Wall Plates England and Europe1 Defining the SV-301xl England and Europe2Defining the SV-302 England and Europe1 Defining the SV-306 England and Europe1 SV-306 Front ViewConnecting the Wall Plates to the SV-552 Connecting the SV-301xl to the SV-552Connecting the SV-302 Wall Plate to the SV-552 Connecting the SV-306 Wall Plate to the SV-552 Optional Wiring the TP Line In/Line Out Connectors Wiring the Twisted Pair RJ-45 Terminals U.SWiring the Terminal Block England and Europe Wire ColorUTP Pinout U.S Terminal Block Pinout England and EuropeCabling for the SV-306 and SV-307 Grounding the Wall PlateGrounding Screw, Lock Washers and Ring Tongue Terminal Wiring the K-Net Connector Part IV Further information Customizing the Controllers Buttons and LabelsBacklit Buttons Button Label SheetSummitView System Cables Recommended Cables for use with SummitView SystemsCable for use with the SV-302 Cables for use with the SV-552SummitView Cable Termination SummitView Cable TerminationD9M/D9F-3 RS-232 Cable Pinout BCP-KNET-50 Cable Pinout See also Figure BCP-2S-25 CableStickers Affixed to Cables Technical Specifications1 of the SV-552 Processor/Switcher Technical SpecificationsDescription ADA Requirements Overhead and Side Clearance RequirementsADA Requirements 15 SV-552 SummitView Essentials Basic System Check List Page Safety Warning

SV-552 specifications

Kramer Electronics SV-552 is a high-performance video and multimedia switcher that provides a versatile solution for various audio-visual applications. Designed for both professional and commercial uses, the SV-552 is particularly well-suited for environments such as conference rooms, lecture halls, and control centers, where reliable and seamless multimedia presentations are crucial.

One of the main features of the SV-552 is its ability to switch between multiple input sources effortlessly. It supports a variety of input formats, including HDMI, VGA, and composite video, making it a flexible choice for users with different hardware setups. This versatility means that whether you're connecting a laptop, projector, or video playback device, the SV-552 can handle it all.

The switcher's output resolution capabilities are impressive, supporting resolutions up to 4K at 60Hz, ensuring that even high-definition content can be delivered without loss of quality. This feature is essential for users who rely on crystal-clear visuals during presentations.

Another significant technology incorporated into the SV-552 is the use of advanced scaling capabilities. This built-in scaler allows users to adjust the output resolution to match the requirements of their display devices, whether it’s a large screen, digital signage, or a smaller monitor. The result is an optimized viewing experience without any distortion or lag.

In addition to its video switching capabilities, the SV-552 includes integrated audio management features, enabling users to route audio signals along with video. This eliminates the need for separate audio switches, streamlining the overall setup while ensuring synchronized audio and video playback.

The device also boasts robust control options. Users can manage the SV-552 via an intuitive front-panel interface or by using remote control through RS-232 or IP protocols. This flexibility allows for easy integration into existing control systems, enhancing the overall user experience.

Furthermore, the rugged design of the SV-552 ensures durability and reliability, making it a long-lasting investment for any professional audiovisual setup. With advanced features, versatile connectivity, and user-friendly controls, Kramer Electronics SV-552 stands out as an essential tool for anyone looking to deliver high-quality multimedia experiences.
Top Page Image Contents