Equipment Parts | Assembly |
1.Punching Handle (PB 300/400 only)
2.Binding Handle
3.Sheet Supporter/Adjustable Comb Guide Selector
4.Adjustable Margin Guide
5.Punching Area
6.Binding Area (Metal Rakes)
7.Waste Paper Drawer
8.Left Side Cover
9.Right Side Cover
10.Disengagable Punching Dies (PB 400/500 only)
11.Margin Depth Setter (PB 400/500 only)
12.Binding Lock Dial (PB 400/500 only)
13.On/Off Switch (PB 500 only)
14.Punching Switch (PB 500 only)
10 1
5
3 
4
To Assemble your PB 300/400 Binding
Machine
1.There are two (2) handles supplied with the machine. Attach the longer (Punching Handle) to the right side of the machine by firmly pressing square hole of handle onto square shaft. To operate correctly, the handle should be positioned as illustrated. NOTE: If the handle is not positioned as illustrated it will not punch.
Once the handle is fully attached, secure it by inserting the screw supplied.
2.Carefully attach the Right Side Cover over the Punching Handle.
3.Attach the shorter, handle (Binding Handle) to the
Secure the handle by inserting the screw supplied.
4.Carefully attach the Left Side Cover over the Binding Handle.
5.To mount the Sheet Supporter/Adjustable Comb
6Guide Selector, first be sure the two (2) phillips
screws are loose enough so the Supporter/Selector9
12slides easily into place. Mount Supporter/Selector and secure by tightening screws.
To Assemble your PB 500 Binding Machine
A
B
C
Follow steps
7
11 8 2
PB 300 & PB 400
|
| 14 | 3 |
|
|
|
| 10 | |
| 2 |
| 5 | |
|
|
|
| |
|
|
|
| 13 |
| 4 |
|
|
|
11 |
|
|
| 9 |
|
|
|
| |
8 |
|
|
|
|
|
|
|
| 6 |
PB 500 |
| 7 |
|
|
|
|
|
| 12 |
2