Smith Corona 200 instruction manual Changing The Correction Tape

Page 7

Changing The Correction Tape

1) Move the print carrier to the center of the platen using the

SPACE

or

.

2)To replace the correction tape, lift out the typing ribbon cassette (see Changing The Ribbon Cassette) and remove the two spools of the lift off tape by pulling them outwards.

3)Place the empty spool of new tape on the left pin so that the tape winds clockwise. Place the tape around the left guide. Pull the tape around the right guide and

place the loaded spool on the right pin so that the tape unwinds counter- clockwise.

★Make sure the sticky side of the tape is facing the platen.

4)Manually turn the left-hand spool in the clockwise direction, tightening the tape until resistence is felt.

5)Replace the typing ribbon cassette.

6)Press the CODE + = (SETTING) key.

-6-

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Electronic Typewriter Parts Description 35. * Right Margin Flush Keyboard LayoutContents Setting Connect PowerChanging The Ribbon Cassette ChangingChanging The Print Wheel Changing The Correction Tape Selecting Pitch Basic FeaturesSetting Impression Setting MarginsSpace Shift and Shift LockCaps Lock Special CharactersBold BackspacingIndex & Reverse Index IndentChecking Your Spelling Option Decimal TabCentering Right Margin FlushCorrection Just Justification Auto Automatic Return ModeLP Line Print Mode Advanced OperationFile Operation Word Processor ModePre-Description Memory All ClearBlock Operation Mark EditorPrint & Stop Code Function Code In WP ModeMaintenance Trouble ShootingSpecification 7301171
Top Page Image Contents