Brother IU 683 / 0402 manual TowerFeed Setup

Page 10

INSTALLATION

TowerFeed Setup

TowerFeed is factory preset for the Brother HL-7050printer. Therefore, it is not necessary to run the TowerFeed setup program for this printer type.

Printer Setup

The TowerFeed Option must be selected using the printer panel as following:

•Press and hold the GO button and press the Set button once. The Display will now show HIDDEN PANEL TOWERFEED ON/OFF.

•Press the + or – buttons as many times until the display shows 'TowerFeed ON/OFF'.

•Press SET to enter into this menu item and press + or - until 'TowerFeed=ON' appears.

•Press SET.

•Press GO.

Now the printer performs a selftest and after this TowerFeed should do a short beep (reset beep of TowerFeed). The option TowerFeed is activated now.

The Interface should be checked/selected using the printer panel (standard setting):

•Press the + button as many times until the display shows --MENU-- INTERFACE

•Press SET once (SELECT INTERFACE)

•Press SET once

•Navigate to the display SELECT =AUTO using the buttons + or -.

•Press SET once

•Press the button BACK twice, the display should show READY.

IU 683 / 0404	8	TowerFeedTM for Brother Printers

Image 10

Contents Installation Users Guide Page Table of Contents TowerFeed 444/xx.18.1y Printer Model and Version ConfigurationPreface Printer ManufacturerUnpacking Re-packingIU 683 TowerFeed TM for Brother Printers BOX Contents Remove Transportation Inserts InstallationPosition and Connect Printer Connecting the Cables Location of the Power Switch Electrical ConnectionsTowerFeed Setup Software Installation Installation of Printer DriverStandard Paper Tray Printer PropertiesSetup Paper Source Word Paper Allocation in the Application ProgramOperating Loading PaperReloading Paper Paper Quality Guidelines Appendix a Printer Specific Notes Appendix B Tips & Hints Power on SequenceCreating Paper Sequences for a Word Document IU 683 TowerFeed TM for Brother Printers Original Copy Brother HL-Laser Printer Paper TypeExample Macro StartMacro End Diagnosing an Error Situation Appendix C TroubleshootingPrinter Display TowerFeed Cause Corrective action Type Other Error ConditionsTowerFeed Beep Types Type 0 1x short Description ActionSoftware Appendix D TowerFeed Control CommandTowerFeed Paper Selection Commands Escape Code Sequences TowerFeed ProgrammingControl by the Printer Driver Implementation of Feed Commands into the Print DataIntegration of TowerFeed Control into Source Code Appendix E Multi-Part Forms Programming Multi-Part Forms ProgrammingTowerFeed Selftest Feature Appendix F TowerFeed SelftestAppendix G Cleaning and Maintenance Appendix H TowerFeed Specifications