Altec Lansing SLS6221 specifications E S S I ONA l

SLS6221

System Specifications

Frequency Response:	32 Hz – 18 kHz (-10 dB)
Maximum Output:	101 dB SPL (1m)
System Power:	58 watts RMS @ 1% THD
Satellite Power:	7 watts RMS @ 1% THD
Subwoofer Power:	44 watts RMS @ 1% THD
System THD (Input to Amplifier Output):	<0.6% THD @ 1 kHz
Signal-to-Noise Ratio:	> 78 dB
Channel Separation:	> 55 dB
Input Impedance:	10 k ohm
Input Sensitivity:	-11.76 dBu (200 mV RMS)
Maximum Input Level:	+12 dBu (3.08 V RMS)
Volume Control:	70 dB attenuation maximum
Treble Level Control:	+/- 9 dB @ 10 kHz
Bass (Subwoofer) Level Control:	+/- 10 dB @ 100 Hz
Recommended Headphone Load Impedance:	32 ohms, each channel
Headphone Output:	7mW into 32 ohms, both channels driven
Drivers (per satellite):	Six 1” / 25 mm full-range 8 ohm micro drivers
Subwoofer Driver:	One 6.5” / 165 mm long-throw 4 ohm woofer
Cables (Supplied with SLS6221)	• Satellite: 4-pin DIN cable (3 m / 9.8 ft.) with extension (2 m / 6.6 ft.)
	• Controller: 9-pin DIN cable (3 m / 9.8 ft.)
	• RCA input cable (5 m / 16.3 ft.)
AC Power Requirements:	• 120 V AC @ 60 Hz (USA, Canada and applicable Latin American and Asian countries).
	• International versions with 220 V & 230 V power supplies are available.
Input Connections:	• Stereo RCA inputs Red (right) and White (left) on rear panel of subwoofer.
	• One 3.5 mm stereo input on rear panel of subwoofer.
	• One 3.5 mm auxiliary input is located on the wired control pod.
Controls:	• Wired Control Pod: Rotary Up/Down Volume, Bass, Treble, and On/Standby
	• Infrared Wireless Remote: Up/Down Volume, Bass, Treble, and On/Standby
Enclosure Material & Finish:	• Satellites: Black injection-molded plastic with painted metal grill
	• Subwoofer: Black painted 9 mm MDF with injection-molded front panel
	and painted metal grill
Satellite Dimensions:	• 2.5" (W) x 1" (D) x 14.4" (H)
	• 64 mm (W) x 26 mm (D) x 365 mm (H)
Subwoofer Dimensions:	• 8.5" (W) x 7.9" (D) x 16" (H)
	• 216 mm (W) x 198 mm (D) x 406 mm (H)
Weight:	• Shipping: 22.5 lbs (10.2 kg)
	• Net weight of satellites, subwoofer and control pod: 19 lbs (8.6 kg)

				AUDIO INPUT
RIGHT	LEFT	CONTROLLER	INPUT	R	L

	Proudly distributed by
P R OF E S S I ONA l	in the United States www.electrograph.com 1-800-776-5768
	© 2004 Altec Lansing Professional. All rights reserved.
	1000 W. Wilshire Blvd., Suite 362, Oklahoma City, OK 73116
	Tel. 405-848-3108 / Fax. 405-848-3216 / proinfo@alteclansing.com
	Visit www.altecpro.com

P R OF E S S I ONA l

Introducing a Sound Solution for All Flat Panel Displays

Visual communication is a powerful thing, but nothing adds to the overall impact like high-fidelity audio. Flat panel displays (FPDs) are the video communication media of choice for corporate, institutional, retail, and commercial clients – anyone who wants to present high-impact, high-resolution visual information.

Unfortunately, choices for FPD audio playback have been limited to low-performance, poor-quality speaker systems. Until now.

Introducing the Altec Lansing SLS6221 system. The first professional-quality 2.1 powered audio system specifically designed for use with FPDs. Now you can provide your clients with high-fidelity, high-definition audio to match the quality of their video presentations.