Altec Lansing IM414V2 manual Spread Your Sound Around, Box Contents, IM414v2 model made for, Power

Page 3

Spread Your Sound Around

Congratulations on your purchase of the inMotion iM414 speaker system— the portable system with an advanced Class D amplifier, surround effect technology and crystal-clear speakers. Its sleek design cradles your Zune player securely and attractively as it pumps out full-range, full-bodied sound that fills the room. The inMotion system’s twin, bass-enhanced speakers blend power and clarity. The built-in FM radio expands your listening options while the wireless remote increases your freedom. You can plug in the inMotion system for AC power, or use batteries to take the music with you. So let the music out!

Box Contents

inMotion digital speaker system

Wireless remote

Power supply

User’s guide and quick connect instructions

iM414v2 model made for:

Zune30GB, 80GB, 8GB, 4GB, Zune HD

Connecting Your Zune Player

Dock your Zune player by sliding it on top of the inMotion system docking station. If provided, first install the docking adapter that came with the inMotion system. While the docking adapter is not required for proper functioning of your Zune player and inMotion system, it may provide a better fit.

Power

Use one of the following two options to power your inMotion system:

AC Power (wall outlet)

Insert the barrel connector from the power supply into the DC connector on the rear of the inMotion system. After this connection is made, insert the power supply into a wall outlet.

DC Power (battery)

Install 3 AA batteries (not included) into the battery compartments in the rear of the inMotion system. Make sure the batteries are installed as illustrated in the battery compartment.

Start Playing

1.Turn on your Zune player.

2.Turn on the inMotion system by pushing the button for about 2 seconds. The LCD screen turns on.

3.Press the “SOURCE” button until “Zune” is selected on the LCD screen.

4.Use the and buttons to navigate through your playlist.

NOTE: To avoid hearing a popping sound when you turn on your inMotion system, always turn on your Zune player or other audio source first.

Power Off

Turn off the inMotion system by pushing the button. The LCD screen turns off.

1

Image 3
Contents IM414v2 Important Safety Instructions Safety InformationPower Off Box ContentsConnecting Your Zune Player PowerSurround Effect Connecting to an Alternate Audio SourceAdjusting the Volume FM RadioNo sound is coming Symptom Possible Problem SolutionPower LED is not lit AC OperationIntermittent buzzing TroubleshootingSymptom Possible Problem Sound is distortedAltec Lansing ONE-YEAR Limited Warranty WarrantySansa and 3 AAA batteries not included